OK thank you. Will look at those two suggestions.
I had it powder coated so looks quite tidy.
Just have loads of unfinished projects and would like to get this one finished.

Thank you for your reply.
It vends on the old pound. The Tic Tac boxes are large ones.
Not quite sure what you mean? Would I have to tighten it up to fit the width? Just seems to be a large gap at the bottom and nothing to stop two packs falling out together.

Bought a vending machine a while back - Tic Tacs - but the vend packs fall out when you wiggle the handle.
Does it need a weight, or is there something else missing? I put a perspex front on it but that never helped.

If you bought it on ebay from a good looking guy from Havant, then yes.

You can calculate the percentage, but for your machine it will be around the 82% mark.

I am glad you like it always pleased they go to a good home

eBay item number:

201701781179 seen this on ebay. I think someone went to a lot of trouble. I like it - they should do this to all old bandits, might even have a bid on it.

Try swapping starters
Is the 6v fuse ok
Lets cure the lights before we get to the hopper
You might need a muti meter from here on in

Yes attach your live to the fuse
You might want to start with a 3 or 5amp fuse

connect your neutral to the red primary side of the transformer you should have a red,a white and a black wire the black does your door lighting and should be 120v the red is neutral and goes straight to the transformer the white is from memory 240v and also goes to the transformer and to the timer ...