FORUM

Had a closer look the two rivets. They look to be for the little spring clips. There are a few broken on the other slides. Hopefully they don’t matter much? Here is a pic of one of the other slides showing the arm for the spring and the two rivets.

Thanks guys, this all helps. Not sure I have the correct rivets to do this job. I just have aluminium pop rivets! But I should be able to fabricate a piece of metal to do the job. Will also need a suitable spring to fit to it. Any idea where to get one from?

Thanks Ronnie

Anyone know or have a picture of how the spring is attached to the bottom slide? I'm thinking I will need to get something welded on a lug or something? I doubt I will find a replacement! Thanks for any advice etc

Ronnie

Here is a pic of the slide with no spring and the anti tamper slide below that. I can’t see anything that moves it, other than the slide above? No horizontal fingers seem to meet it?

Thanks for that. When you say pivot point, is that on the horizontal finger? Also that slide has a shoulder either end, one up and the other down, so if it was fixed would it not also restrict the slide above it?

Thanks Ronnie

All slides need springs attached. If your bottom one hasn't got one that explains why your pay outs are all to cock and also why your single cherry did nothing. OK thanks. I need to figure out where to attach a spring and why the extra coin is dropping. So far one cherry drops 3 coins, two cherries...

Ok the bottom slide must be the two coin slide, so a cherry win? Well, as it’s not sprung, it can never slide back to drop the coins? So when a two cherry win is made the next slide is also tripped, knocking with it the bottom slide. I should have taken a pic of that bottom slide. It has nowhere to ...

So I removed the anti cheat slide and put it all back together. It’s still not right! The bottom slide that has the bar to reset all the slides has no spring! Is that right? As it seems when a win comes in it’s still up against the slides blocking them from sliding back! I did notice the bottom slid...

Thanks for that. I will have a look at the reel. I can hear a scraping sound when I spin it but don’t see it catching anything!

Yes the Chrome is not great. It’s not flaking or anything. I did think about painting it. Yours look great. Did you use rattle cans?

Thanks Ronnie

Great stuff thanks for clarifying, should get that done today then I can Look at the cherry missed payout or maybe that will return. Only other niggle is reel 3 is dragging somewhere seems to have a tight spot? I stopped the mech mid spin but can see nothing fouling the reel or pay cog ? Thanks Ronnie

Ah, I wondered its purpose. That sounds the way forward if it can work without it. A fair bit of stripping down to get at it! Thanks for the info. This anti cheat thing - is it actually a slide but just thin metal with also a hole for coins to drop through under the main slide that has the bar that ...

Ok I’m working on the Sega bandit and it was mostly working apart from payout on one cherry. I checked the springs and the finger was entering the disc. The spring was stronger that the rest on the vertical fingers, so I replaced that. No change. Now at the bottom of the payslides there is a thin sl...

Nice tell tell
Me more

Hi. I know this has been a long while! I never did get the glass from tree frog so I will be attempting to touch in the bad art on the award card. Also I noticed the top coin entry is back lit but the insert fitted is a piece of cardboard! My ocd part wants this to light up as intended! Anyone have ...

Anyone know the bulb type for these? I'm reading 9 volts to the socket, screw in type, I have some but 47 volts!

Thanks Ronnie

treefrog wrote: ↑Thu Apr 07, 2022 12:20 pm ….anyway was cheap enough

Lol I paid more than I planned. I set £15 under what it went for, only 9 miles from me and not often stuff comes up round here! Yes the colours are dull but I remember lots of others similar such as Cascade etc.

As in Whoosh they were gone lol

Topic merged - Site Admin. Picked this up at a local auction, described as locked no keys not working! Had to drill the lock to find the key inside! All looked complete clearly working on 1p coins but should be 3d coins I think, The big multi plug thing was hanging out, upon plugging it in the mach...

Just a small update on some observations, in the case of 3 oranges the vertical finger is slightly obstructed ( it is slightly outside the hole) on the 1st pay disc so it never enters the pay discs hence no payout! Not sure how that would be resolved? Adjusting the reel 1 stop cog? Also I noticed th...

Ah yes, it will be 3 bars. Here is a picture before the new belly glass was fitted.