Show us what you found. Make us jealous!
geofflove
Posts: 150
Joined: Sun May 03, 2020 2:01 pm

So I might have over-shopped....

Postby geofflove » Fri Jul 10, 2020 4:53 pm

So I’ve just had a 300 mile round trip to collect a job lot of allwins. Is there a collective noun we can use? Maybe an algorithm of allwins? Anyway, it was a fair van load! I’ve now got sufficient ‘projects’ to last quite some time. Unless I decide to bump some in their current state to make the pile more manageable. Anyway, being fairly new to this game there are a few here I don’t recognise so if you fancy an allwin picture pub quiz and can put some names and any interesting info to the pics you’d make my day!

But first a little story. The family I got these from bought a leisure park/lake in the '50s. They said all the machine were already there then. I’m guessing therefore that most of these machines must be '40s/'50s? They were then taken out in the '70s I believe and have sat in a shed since. A long sit!

They are in various states of disrepair. Most mechanisms are in tact but frozen solid. Looking at them I think a dismantle, rust removal and clean will get most working fine. A few seem to have the thumb lever missing and a couple of payout cups are awol too. Many of the cases have suffered worm and rot in places (or all over in a couple of cases!). Mostly at the bottom from standing on damp I suspect. Many are salvageable with a new bottom piece, a few will need more extensive work. I think the worms are long since dead but I’ll be keeping an eye on that!

All are the more basic allwin single win mechs I think. Many have a ‘British Automatics Co’ plate on them. I’m guessing they were supplied by them on a profit sharing basis. In terms of makes there are a number of Wonders machines including a couple of coconuts, a couple of wonder wins(?) and a couple of 24 cups which I think are wonders too? A number look like whales machines from the mechs but not sure. Quite a few claim to be ‘allwin deluxes’. There are some of which I have no clues.

I now need to decide where the hell I start with this pile which is now filling my storage unit!

So quiz time? I’ll number them to keep track! Enjoy!
IMG_4278a.jpg
1
IMG_4282a.jpg
2
IMG_4284a.jpg
3
IMG_4285a.jpg
4
IMG_4286a.jpg
5
IMG_4287a.jpg
6
IMG_4288a.jpg
7
IMG_4289a.jpg
8
IMG_4290a.jpg
9
IMG_4291a.jpg
10
IMG_4292a.jpg
11
IMG_4295a.jpg
12
IMG_4296a.jpg
13
IMG_4297a.jpg
14
IMG_4298a.jpg
15
IMG_4299a.jpg
16
IMG_4300a.jpg
17
IMG_4302a.jpg
18
IMG_4303a.jpg
19
IMG_4304a.jpg
20

User avatar
brigham
Posts: 726
Joined: Tue Oct 31, 2017 3:37 pm

Re: So I might have over-shopped....

Postby brigham » Fri Jul 10, 2020 5:12 pm

24 Winning Cups is by Oliver Whales, as is PLAYBALL and The Easy Nine.
What a state!
Where to begin?

geofflove
Posts: 150
Joined: Sun May 03, 2020 2:01 pm

Re: So I might have over-shopped....

Postby geofflove » Fri Jul 10, 2020 5:17 pm

Indeed! I think I'll pick one of the slightly less wrecked ones and go for a quick win to start! I do like the graphics on the wonders ones so maybe that's where to start!

cait001
Posts: 161
Joined: Mon Jun 18, 2018 1:33 am

Re: So I might have over-shopped....

Postby cait001 » Fri Jul 10, 2020 7:32 pm

love the intense graphics on 5, 18, and 20.
What a haul

User avatar
badpenny
Forum Moderator
Posts: 6384
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: So I might have over-shopped....

Postby badpenny » Fri Jul 10, 2020 7:54 pm

A gallery of allwins.

geofflove
Posts: 150
Joined: Sun May 03, 2020 2:01 pm

Re: So I might have over-shopped....

Postby geofflove » Fri Jul 10, 2020 8:27 pm

cait001 wrote:
Fri Jul 10, 2020 7:32 pm
love the intense graphics on 5, 18, and 20.
What a haul
I must be a bit vanilla, I’m not sure a fan. Much prefer the stuff on the Wonders.
I’m swinging between thinking it’s a great haul and wondering what on Earth I’ve done! :HaHa:
I’m hopeful I’ll get a few of them looking respectable though. It’s judging that line between making them as pretty as possible v retaining as much original stuff as possible. If I wanted super pretty I’d just build new cases for them but that’s not really what it’s about is it? That said the cases will certainly needs some new bits to replace the missing and rotten.

13rebel
Posts: 505
Joined: Tue Nov 03, 2009 4:03 pm

Re: So I might have over-shopped....

Postby 13rebel » Fri Jul 10, 2020 9:12 pm

Although Oliver Whales did make a 24 cup,the version shown is by Wondermatics.

geofflove
Posts: 150
Joined: Sun May 03, 2020 2:01 pm

Re: So I might have over-shopped....

Postby geofflove » Fri Jul 10, 2020 9:18 pm

A quick question. On some, like no 19, the actual backflash is in ok condition but the clear plastic covering is not and will need replacing. What material is the best thing for this job and in what thickness? I guess it needs to be not thick and easyish to cut accurately given all those cups which will have to come off and go back on top again.

What have others used?

User avatar
JC
Posts: 942
Joined: Sun Feb 19, 2006 10:38 pm
Location: Kent
Contact:

Re: So I might have over-shopped....

Postby JC » Fri Jul 10, 2020 10:38 pm

24 Winning Cups is by Oliver Whales
Actually, they're Wonders. Full list below - those that I've left blank are Allwin Deluxe type machines, which could be of German or British origin.

1. Whales
2.
3. BMCo
4. Whales
5. BMCo
6.
7. BMCo
8. No picture
9. Whales
10. Whales
11. Wonders
12. Whales
13. Wonders
14. Wonders
15. Whales
16.
17. Wonders
18. BMCo
19. Wonders
20. BMCo

Good luck with that lot! There'll be some nice machines there if you can spend the time on them, particularly the BMCo. Unfortunately, I reckon there's going to be quite a few that may not be worth the time and effort.
Good luck !THUMBS!

13rebel
Posts: 505
Joined: Tue Nov 03, 2009 4:03 pm

Re: So I might have over-shopped....

Postby 13rebel » Fri Jul 10, 2020 11:11 pm

With regard to recovering the plastic sheet on number 19.Mine needed doing too and measured it to be in the range of 230-250 microns thick.So to keep it to this standard I got some 'Acetate' sheet A1 size.Unfortunately the company has ceased trading but there maybe others.This size and thickness is not so easy to source now but if you're not too bothered about matching thickness then I think 'Fred Aldous' does the A1 size in 115 microns thick.


Who is online

Users browsing this forum: No registered users and 4 guests