Search found 60 matches

by dirk55
Sun Sep 06, 2020 1:45 pm
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

Hi Paul, If you look at the back of your mech, you will see a flat bar ( upper left.), this is attached to a spring rod, this is the spindle brake adjuster, This is adjusted so that the tension on the spindle will slow it down gradually before the end of cycle. If you look at the position of yours i...
by dirk55
Fri Sep 04, 2020 5:02 pm
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

OK Paul, as you crank the mech, just do this slowly and check the movements of each linkage, to see if anything is binding. Looking at your mechanism it looks pretty clean, but I can't see any signs of lubrication. Also have you checked the center spindle to see if this is running free and true.
by dirk55
Fri Sep 04, 2020 5:27 am
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

On mine Paul, the pin is in the bottom hole,
Have you tried to crank the mech now it's out of the case.
by dirk55
Thu Sep 03, 2020 7:48 pm
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

Paul, can I just ask, when you got this machine did it have coins in it?
by dirk55
Thu Sep 03, 2020 6:25 pm
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

Thank you Paul, for the photos, but if you would please, can you post a photo of the full front of the
Mech,
by dirk55
Thu Sep 03, 2020 5:40 pm
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

OK Paul,
Next step, take the mech out of the case, just 3 nuts to undo, then if you will take photos of front and back, just so we can have a look to see if we can see anything obvious. as said earlier very robust machines, but it may have been dropped. :oops:
by dirk55
Thu Sep 03, 2020 11:42 am
Forum: Questions and Answers
Topic: Bryan’s clock key to handle conversion.....
Replies: 18
Views: 1862

Re: Bryan’s clock key to handle conversion.....

Hi Paul, Have you had the mech out of the case, I'm asking because if it is put back in without aligning the spindle on the mech with the cast loop on the back of the turn key this can cause problems. Look inside the back of the case and you should see the spindle, if positioned correctly should be ...
by dirk55
Sun Apr 12, 2020 11:13 am
Forum: Let's Talk about Slots
Topic: 12 Win Clock
Replies: 26
Views: 5742

Re: 12 Win Clock

Hi Rick To set up your jackpot, try this - it worked for me: First check your jp is in the closed position; now disengage the the pecker blade from the index wheel; rotate the index wheel to the 12 win position and insert the pecker blade. If the pecker blade is now half way down the slot, look at t...
by dirk55
Mon Mar 23, 2020 7:43 pm
Forum: Let's Talk about Slots
Topic: Time to ........
Replies: 75
Views: 15723

Re: Time to ........

I want one.
by dirk55
Mon Mar 23, 2020 7:32 pm
Forum: Questions and Answers
Topic: Bingolett
Replies: 24
Views: 12275

Re: Bingolett

Hi thomas911
Can you let us know if you purchased this machine with the problem or has it suddenly started?
On your Bingolett, what is the highest payout and what coinage?
Does it pay anything on highest win or nothing at all?
Best regards Derek