FORUM

I need 2. I know I can bend the wires, and pretty sure I can come up with something for the shoulder screw. How much?

Quick Returns parts wanted. Trying to put the payout aspect of this back together. Anyone have any spare parts? I need 2 of the levers at minimum. The rest I think I can make, though, if anyone also has the shoulder screws and the "wires", I could use those too.

THANK YOU!

THANK YOU! That makes sense, now. I wish the picture showed the right side of the levers, but I think there's enough that I understand how to do it. The wires should be fairly easy as I have a lot of various size piano wire I used in restoring pinball machines. The shoulder screw, I think I can repl...

Topic merged - Site Admin. Starting a new thread on this...sorry if inappropriate. As the subject alludes to, any idea how to adjust the payout on a Wonders Quick Returns? Mine came set for a payout of 2 on every "position". I've seen pictures where they payout 2, 4 or 6 depending on what...

Pretty much done.
Question. When I got it, all the payouts were labeled for 2. Underneath was another label with varying payouts. Any idea how to adjust things to get the varying payouts?

For the time being, I'm not going to try re-doing it. Plan is to replace the acitate with 5mil lexan. I'll have to see how it looks after the rest of it is fixed up. Thanks all!

Thank you. Doesn't look like anyone's redone the art....yet. Guess I'll take a shot at it.

Picked up my 2nd Allwin here on the wrong side of the pond :-)

There used to be a section here with re-done art work people uploaded (I believe I uploaded some for my other, FlashWin allwin). I can't find where that is now...and, has anyone re-done the art for Wonders Quick Returns?

Glerios, Seipel & Co. Fußball-Match flyer
(Copied from Re: Glerios, Seipel & Co. Fußball-Match identified)

I was BEYOND elated when I found it !!YIPPEE!! Starting in on refinishing the wood work and cabinet (waiting on a pile of metric hardware I had to order to get here). ALL the veneer is falling off and it's going to have to be re-veneered. Slowly but surely, it's coming back to life. Pics of the scor...

I feel like I hit the all time jackpot! Taking the rest of the game apart to start working on the cabinet....someone at some point, over the last 70 years, drew a little picture on the inside.

HELP :-) I've run into a slight "roadblock". When I got this, the chains that turn the players had fallen off. For the life of me, I can't figure out the path they need to take. Is anyone able to draw up a little diagram of their path??? Also, when they turn, do ALL the players of each &qu...

Very nice! Where is that from? Is there another brochure?

I sure would like to find a picture of the manual score disks on the top. I have the base part of them...but no idea what the top part looks like.

No problem...thank you for letting me know. All I saw when I logged in today, was it was gone :-)

I had made a post about a Glerios, Seipel & Co. Fußball-Match. It was pretty extensive, had a lot of pictures, and I was looking for some parts and advise. It was up for about a week....and today, looks like it was taken down. Why? Did I do something wrong?

pennymachines wrote: ↑Fri May 11, 2018 10:57 am I have the flyer for it somewhere and the machine itself...

Did you ever find the flyer? And if so, can you post a picture of it?

Post moved & merged - Site Admin. From across the pond, I'm back. Keep finding these old odd games. This time, a "Fußball-Match", needing a TON of work...But, I think I'm up for it. I think...I hope. It needs SO much work. So, some questions... Does anyone have one that might be able ...

Thank you! So, is the end of the hammer that hits the ball supposed to have rubber on it? I can probably make a rubber tip from a pinball machines shooter work. Right now, it seems like the hammer hit too low on the ball. It also seems like over the years, the hammer has gotten lower, to the point o...

Well, I think it's coming alone quite nicely. Still don't have the electric pay-out working. The new top glass is just printed on a piece of paper, sandwiched between two pieces of glass. Looks rather nice, but I still need to get it printed onto glass. Gotta refab and replace the bottom door...not ...