FORUM

https://www.lampco.co.uk/products/bailey-s63928003-s6-festoon-6x39-28v-3w?variant=35199524307107&currency=GBP&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&srsltid=AfmBOoqMNFbbPUe-5OTaEAiqAXkZMZN6nHoHPVjOFwKq9xakLwGc4gCrxwQ Check t...

Splendid news.
You have been spared the effort of 'de-decimalising' this lovely old machine.

If it pays 2 for a cherry on sixpences, then it probably IS still on tanners. Does it pay the higher awards correctly?
The 2x cherry fault is probably just the finger not going far enough forward. Check that it goes through BOTH holes, when 2x cherries appear.

I'd like to see inside that one!

Same idea, but in the bath.

My first thought was Stoner, but I'm not sure why.

I've ordered the film.
It looks like a Bryans Allwin; could it be a yet-undiscovered Bryans product?

It looks as though a tab has broken-off from the front centre of the slide, but I'm guessing it's just repetitive striking of the front edge.

Outbid on the Green Ray.
It looked to be in unrestored condition. A remarkable survivor, if so.

I'm guessing that's CAM Automatics of Seaham Harbour, although I've never seen a German conversion by that maker.
It's impressive. The artwork is nicely done.
Does it still have the long 15-second play?

If it's for a Powell's Automatics O-X-O, it's a definite improvement!

Could be DAVAL?
(or even Jennings!).

...and vice versa.

I have a couple of 'Nostalgic' allwins.

They are probably useful as a base to make a home-brew allwin.

Surely a 'disinterested relative' would be barred from inheriting?

I remember the second one.

It was full of kids talking over each other, incoherently.

Some people clearly have no respect for half-a-crown.

Looks really good.
Did you build the cabinet, or use one from a left-over Bryan's Post Card Vendor?
Great result either way!

Reversing a DC motor by changing the input polarity only applies to permanent-magnet motors, usually found in Hornby train sets.
To reverse a 'proper' motor, you need to reverse the field connections OR the armature connections, but not both.

I went through a Bally 'phase' about ten years ago.
The only ones I have now are the PE Gold Award conversions.
They thankfully don't have the hopper payout!

These people have taken fanaticism to the point of insanity.

Their actual position is this: Galloper rides encourage people to think that riding horses is acceptable.

Well it is!