Search found 114 matches

by pennywise
Mon Apr 13, 2020 9:48 am
Forum: Questions and Answers
Topic: German wall hanger
Replies: 2
Views: 1801

Re: German wall hanger

Thank you radiochrissie, I've metered the diodes and all seem to be OK but will replace if gone. Need to replace the two that have gone first, so now at least I've got a place to start. Thanks again - will let you know if I get it going, or just cannon fodder. 😂
by pennywise
Mon Apr 13, 2020 8:18 am
Forum: Questions and Answers
Topic: German wall hanger
Replies: 2
Views: 1801

German wall hanger

Hi guys, I have this wall hanger that did work but the resistors have got hot and blown. There is no markings on the resistor and when i put a multimetre on it there is nothing at all showing. Hopeing that someone has the same machine that could give me a reading to find out the size of what i need....
by pennywise
Sun Aug 18, 2019 9:09 am
Forum: Questions and Answers
Topic: Jubilee Rivieria restoration
Replies: 13
Views: 7177

Re: Jubilee Rivieria restoration

They could be from the front at the sides of the pay window. You have four bits like that that separate the pay window where the reject coin comes from. If not from there I don't think they are from the Rivieria, unless been adapted if other bits are missing. Put a pic of the front view of your mach...
by pennywise
Sun Aug 18, 2019 5:49 am
Forum: Questions and Answers
Topic: Jubilee Rivieria restoration
Replies: 13
Views: 7177

Re: Jubilee Rivieria restoration

Never tried silver leaf. If it's the same as gold leaf it could be an expensive way and long way of doing it. Least with the wrap it's quick - took about an hour to do the full machine and works out it cost me about 4 quid in wrap.😁 How do I post a pic? Hi BB, Before you submit a post, if you look j...
by pennywise
Sat Aug 17, 2019 7:46 pm
Forum: Questions and Answers
Topic: Jubilee Rivieria restoration
Replies: 13
Views: 7177

Re: Jubilee Rivieria restoration

banditboy67 wrote: Sat Aug 17, 2019 7:29 pm Can you post me a few pics please from inside the door please around the top, belly & reel glass please, machine I bought they’d been removed
No problem John got loads so just let me know any areas you need to see, im on my 8th Rivieria now🤣
Hope these help pal.
by pennywise
Sat Aug 17, 2019 6:54 am
Forum: Questions and Answers
Topic: Jubilee Rivieria restoration
Replies: 13
Views: 7177

Re: Jubilee Rivieria restoration

I've just bought a set of calligraphy to do mine with banditboy. Do they work as I have not used them on glass before? 🤔
by pennywise
Sat Aug 17, 2019 6:52 am
Forum: Questions and Answers
Topic: Henry Powell
Replies: 13
Views: 6744

Re: Henry Powell

I wanted some parts for my Aristocrat Deci King which he had and gave me a price between 100 and 200 about 6 months ago. Never got back to me so haven't been able to finish it, so it's just sat in the corner waiting for the parts I need but I have bought off him before. It's just annoying when peopl...
by pennywise
Fri Aug 16, 2019 12:10 pm
Forum: Questions and Answers
Topic: Jubilee Rivieria restoration
Replies: 13
Views: 7177

Re: Jubilee rivieria restoration

Hi TF, I've only seen one painted before but didn't look that nice, I do have a hammered finish one which looks pretty good but do like the chrome work on these machines. Looks like I will stick with the wrap then on the other one I have to do until some miracle chrome comes out that's cheap.🤣 The w...
by pennywise
Fri Aug 16, 2019 10:00 am
Forum: Questions and Answers
Topic: Jubilee Rivieria restoration
Replies: 13
Views: 7177

Jubilee Rivieria restoration

Hi guys, Just finished the restoration on another Rivieria and wondering if there is any other way to chrome apart from wrapping. It looks 10 times better than it did as it was all painted over with a nasty grey and after blasting i could only salvage the cash draw, still not perfect but will do for...
by pennywise
Fri Jun 28, 2019 1:49 pm
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

Cheers TF, again any help would be most welcome. Once I have done this, I will know what to do in future, as I'm still learning and not done this before. Back on the back burner again for now, but I will get it bloody finished if it kills me. Sorry to be a pain, but thanks. 🤨
by pennywise
Fri Jun 28, 2019 11:29 am
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

How weird is that, been looking for ages as well. Oh well, least I've got it sorted now TF. Now in the pic I've put up it shows that all my fingers have been cut the same even the spare ones (hope you can see it) - so does that mean I need different finger because I can't see how I could make this w...
by pennywise
Wed Jun 26, 2019 10:10 am
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

That's brilliant, thanks. Got the payouts sorted on mine, this afternoon. Firstly, the coin slides were in the wrong order so it was paying out 7 coins, instead of 10, then the payout fingers. There are 9 fingers, 4 of which had no springs. The 3/5 finger and 10 finger were fine, but the 3 after wh...
by pennywise
Fri Jun 21, 2019 5:02 pm
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

Big thanks again Tf, bit of cutting and bending and fits like a glove. All doing as it should now so hopefully get the slider sorted over the weekend. Before i took the reels out all 3 spun great but when i've put them back in the first reel now is not spinning correctly slower than the other 2. Jus...
by pennywise
Thu Jun 20, 2019 5:12 pm
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

If you read his comments you will see his were wrong. From bottom up on yours, the first slide would be 3 coin, then 2 coin, then the big 5 coin, then 4 coin, 4 coin and on top a 2 coin.... From your picture, assuming your spare slide is the same thickness as the one second from bottom, then it sho...
by pennywise
Thu Jun 20, 2019 10:52 am
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

Yes TF, it had a sticker with 10s on it that I peeled off, but in special's picture of the slides the spare I have looks like it goes 2nd from bottom according to the pic. That's why I asked if that was the correct order. At least I have the info now how to get it to correct payout, so it's just whe...
by pennywise
Wed Jun 19, 2019 4:16 pm
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

Thank's Special is that the correct order of the payslides as i have only 5 working and one that was in the cash box when i got it, why it was taken out god knows.
by pennywise
Tue Jun 18, 2019 11:48 am
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

Let me know if you need any more pal.
Aristocrat Clubmaster award card
by pennywise
Tue Jun 18, 2019 11:48 am
Forum: Resources
Topic: Aristocrat Clubmaster award card
Replies: 0
Views: 2765

Aristocrat Clubmaster award card

Hidden Content
This board requires you to be registered and logged-in to view hidden content.
Aristocrat Clubmaster award card.
by pennywise
Wed Jun 12, 2019 12:30 pm
Forum: Questions and Answers
Topic: Aristocrat Clubmaster
Replies: 94
Views: 46198

Re: Aristocrat Clubmaster

Cheers Tom, I have a couple of shoulder bolts or could knock something up to fit and a really big thanks for digging through your treasure to find this stuff for me, really do appreciate it mate. I will send you a PM with my address if I can and let me know how much including postage and I will pay ...
by pennywise
Wed Jun 12, 2019 12:20 pm
Forum: Questions and Answers
Topic: Sega reel strip number????
Replies: 12
Views: 5900

Re: Sega reel strip number????

TF, please don't laugh but I never saw the locking bar lever as I don't have one on the mech that I was looking at. I moved the lever to the right and it released the reset bar...DOH!!!🤣 I could kick myself. Now it pays out perfect as the pay card on the machine shows, but it needs the original reel...