Search found 13 matches
- Fri Nov 19, 2021 11:26 am
- Forum: Open Forum
- Topic: Birnbeck Pier - Proposed Renovation
- Replies: 2
- Views: 630
Re: Birnbeck Pier - Proposed Renovation
I live in Cheddar and regularly walk along Weston-super-Mare seafront to Birnbeck Pier. I must admit that I thought it would never get the go ahead to be restored. It is very dilapidated and the restoration cost must be astronomical. So it is excellent news to see this post. It would be a great plac...
- Tue Jul 06, 2021 11:11 am
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
The Beromat is now working perfectly after forum member Ted kindly cast his expert eye over it and made various adjustments which included slowing the machine down so it runs for the correct 15 seconds. I thought I was going to drive halfway across the country to find an expert who could fix it but ...
- Mon Jul 05, 2021 6:54 pm
- Forum: Tips and Tricks
- Topic: Service, repair & restore Beromat, Novomat etc.
- Replies: 53
- Views: 19194
Re: Removal, basic maintenance & repair of Beromat etc. mechanism
A couple of photos of my Beromat. The photos were correctly orientated when I attached them but I think the site has rotated them. (I've swizzled them round for you, it wasn't the site. You'd replaced the mechanism sideways when you put it back in its case BP) I've got some veneer to replace on the ...
- Mon Jul 05, 2021 3:01 pm
- Forum: Tips and Tricks
- Topic: Service, repair & restore Beromat, Novomat etc.
- Replies: 53
- Views: 19194
Re: Removal, basic maintenance & repair of Beromat etc. mechanism
Thank you for the translation Tallpenny. Saves me trying to get hold of a German dictionary. A forum member has fixed my non-paying Beromat today and given it a 20,000 mile service. Runs beautifully now. Someone had modified the governer to speed it up but it now runs at the correct speed. Some othe...
- Wed Jun 30, 2021 4:55 pm
- Forum: Tips and Tricks
- Topic: Service, repair & restore Beromat, Novomat etc.
- Replies: 53
- Views: 19194
Re: How do you remove the mechanism from a Beromat please?
Brilliant. Thank you.
- Wed Jun 30, 2021 2:48 pm
- Forum: Tips and Tricks
- Topic: Service, repair & restore Beromat, Novomat etc.
- Replies: 53
- Views: 19194
Removal, basic maintenance & repair of Beromat etc. mechanism
Topic moved & merged - Site Admin. I would like to remove my Beromat innards from the case but can't see how to do it. I can see there are four wingnuts and brackets. Will the whole mechanism then slide right out of the operating handle mechanism and also leave the coin shute in place? Cheers. ...
- Tue Jun 29, 2021 10:13 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
Thanks very much. I really appreciate your help. My machine behaves the same as yours. The lever moves up and down very freely whilst the reels are spinning but not with the reels stopped and the top bar swivels without any discernable friction. I will persevere with it. I'm guessing that something ...
- Tue Jun 29, 2021 9:17 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
Thank you. Yes, if I apply gentle pressure to the top of the roller I get a payout even if it's not a winning line! The vertical rod has a good few mm of up and down movement with the reels stationary but no up and down free play when the wheels are spinning.
- Tue Jun 29, 2021 8:44 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
I haven't got a smartphone or any way of doing a video. This photo shows the lever that connects with rods to the payout slides. If I spin a winning line it doesn't pay out - but if I tap the top of the roller on top of the lever it works. However, in line with what you've said I'm not sure stronger...
- Tue Jun 29, 2021 8:23 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
I think the clock is OK as the machine seems to work well, it's just the payout that doesn't happen. I'm a bit stumped as everything seems very free i.e. there's nothing I can see that seems gunged up. What I really need is someone who knows what they're doing. I did email the chap in Launceston (ba...
- Tue Jun 29, 2021 3:30 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
I've had a look at the mechanism and it seems to me that the top shaft that pushes down on the lever that operates the payout slides does not seem to be sufficiently sprung to put enough pressure on the lever. Sorry to be so vague but I don't know the correct terminology for these parts! I wish ther...
- Tue Jun 29, 2021 1:58 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
Re: New Member in Somerset
Thank you. I will certainly look at it but if anyone knows of someone who repairs / services one armed bandits in the south west I'd be grateful to hear details. I found someone in Launceston but that's quite a trek from Cheddar. I'll have a look at it now anyway.
Cheers. Bruce.
Cheers. Bruce.
- Mon Jun 28, 2021 4:07 pm
- Forum: Introductions
- Topic: New Member in Somerset
- Replies: 18
- Views: 4788
New Member in Somerset
Hi. I've recently managed to get hold of a Beromat one armed bandit but it hardly ever pays out on winning lines. I've tried cleaning the payout slots but that didn't help. I'm in Cheddar, Somerset and someone told me that there is a chap in Burnham-on-Sea who services one armed bandits. Does anyone...