FORUM

Looks good coppinpr.
All I see different is the button coloring and the word lost missing above the button.

Some nice machines in that video.

coppinpr your picture on page three looks to be cards separate from glass yet arrgee's post on page four appears to be part of the glass. I will do mine as part of and in German but being vinyl it can be cut out easily if wanted. I found a place that said they can do a print to be attached to the ba...

Thank you.

That's what I will try badpenny.
That or the fiberglass resin should work.
I kind of think the fiberglass would be good for strength.
Have you ever dripped it on cement? Good luck getting it off!!!!

Thank you pennymachines. !!CHEERS!! The sign place that I asked for a quote got back to me. They don't print and I don't want it cut in individual strips, so I'll look for a graphic print shop. One more question since I don't have access to a glass to compare. Are the graphics and mirroring on the f...

Yes the step off is from the image. Thanks for noting. Easy fix. !!CHEERS!! I figured the cards came on the glass so I would leave them in. They can be cut out easily if you wanted. :!?!: While on the topic do the stripes go all the way to top and bottom or is there a horizontal strip as I put in my...

I printed this in black and white on letter size paper and taped it on the glass to check the sizing. It looks somewhat colored in the picture but is black and white. Lol Looks to fit nicely. I have requested a quote to get it printed both as a stick on and a rear glass transfer where you put it on ...

If it makes noise it will be played.

Thank you for the replies. This piece looks as though whoever painted it tried to pry it to take it off and bent it. The fellow I got this from said it was painted and the plate was warped when he got it. He had it for about twenty years. The piece that broke off was done when it slipped in his hand...

My Rotomat Juwel side plate (behind the activator arm) has the top arm stop broken off. I have the piece that is broken and looking for suggestions for repair. I'm thinking fiberglass resin or jb-weld? I doubt I will find a replacement here because these machines are rare here. The broken piece is t...

A cheap heat gun will give heat only to where you need it.
I use one to make birds out of plastic piping and it works well

Thanks pennymachines.
I got it.

This one I think is sized properly.

Working ok here.
I even used another computer and it logged me in.
That I don't understand but it did.

Nice collection badpenny.

I cleaned up the circles and updated the image in the post above.

Scotty where do I find information on the Chicago show?

********. I found it Scotty. *********

pennymachines yes I've looked at that post and this would be an option I'd descuss with the printer. I tried to size the image to fit the glass so you have a starting edge or even two if you start in the corner. I'm shire this could also be setup that the backing paper is split right down the middle...

Arrgee I've been playing with the picture you posted to do graphics on the duomat. I should be able to get this printed on a chrome or mirror vinyl. The white areas would be transparent so no ink and be mirrored. Stick it right on the glass and leave it as it is or add a second glass over it to prot...