FORUM

Hi cait001
Glad the rialto is all up and running I'm sure you will have lots of fun with it.thankyou for posting the link very informative.
Derek

I collected the battered BM Co Cresta Run today. The chap told me he had it for 30 years. 10 of those years it was on an outside wall :!?!: . Of course the case has had it. I knew I would have to make a new one. This I will do and I will try to be as close to original as I can. Suprisingly, the mech...

Thanks coppinpr.

Hi coppinpr
I must be doing something wrong sending you a pm. Could you please send me one and I will try to reply. Thanks.

Thanks Bp for your post it was probably my fault for not explaining myself correctly.

Thanks for all your replies i dont know if this helps it pays
20 coins as well as the jp.
The way this is set up is not every ones taste but we like it especially the grand kids.
Thanks Derek
Hi coppinpr I've sent you a pm

Thank you for your advice.
Hi coppinpr, yes, I am interested. I will be in touch.

Can anyone tell me if there is an award plate for a Mills high top that reads, '3 bell fruits anywhere in the window pays jackpot'? Please forgive me if this is a silly question but I am a novice so I am still learning. I should mention that when I purchased this it did not have a jackpot. But I had...

Hi Alan55 I have some tubing 34mm id 35mm od about 600mm in length. It is mild steel chromed I am working in Southport for the next 2 weeks if you're interested F.O.C. The Bryans clock I bought from you is still working fine, never skipped a beat, also the chrome on the clock is still perfect. If yo...

Thank you very much coppinpr

The stop posts (bumpers) have a rubber grommet over them to bounce the ball into the playfield.
The size of lamps for the numbers are 30mm qty 28.
In the playfield these are 36 mm qty 7.
There are 3 sizes originally but I could not find the other size in LED but the 36mm works fine.

Go to your local fishing tackle shop - you can buy rubber tubing from there. Best to change all of them.

Thanks for posting the photo. OK so there is no slot on the coin tube that I can see. Therefore your options are feed the coins through the coin slot at the side of the machine while the door is open. When you see the coin come to rest, bring the pivot arm down which is located to the right of the c...

Hi junior The Bingolett has only 1 ball - you get 3 chances. As far as I know there are three versions of this machine the Bingolett and two versions of the Rialto, one of which had a time out auto flick but I'm not 100% sure so maybe someone with more knowledge than me can put this right. You say y...

Sorry, I posted the wrong link.

Look at this on eBay http://www.ebay.co.uk/itm/192187333387

Yes you're right - screw rivet pins.

I think they are called rivet pins.

Hi mei - mei
If the hand doesn't fit through the centre hole easily you will struggle to get the clock face assembly over it. If possible can you file the hand to fit?

Nooooo
Hour hand first. But need to know condition of both gears before we progress

Hi mei-mei The clock hands need to be set up at 12 o clock, this is the jackpot position. The clock face needs to be off. When you are sure the mech is in the right place for a jackpot win the small hand is then soldered on to the shaft of the brass gear. Clock face back on mech back in the case and...

Hi mei mei, I am busy at work at the moment so can't help yet. I will get back to you over the weekend. Enjoy your beers.