FORUM

Coming up for my 20th anniversary on here, this year

What a great job

Have the springs on the payout fingers been replaced? Sometimes they are a bit too strong. Remove 2 or 3, then try again.

Great machine, would have loved that, myself.

Hi Gastoon. Here's a pic of what you have missing. The spring should be easy enough to source, and the pawl for the ratchet doesn't really affect game play; it's just to stop people turning the win knob back & forth to get multiple coins. Also, it looks like your coin slide might have been insta...

Think you'll need a few gallons of this! https://www.ebay.co.uk/itm/325842405542?hash=item4bddb888a6:g:L5YAAOSwUldlC~Nk&amdata=enc%3AAQAIAAAAwC125BQ%2FGqSymnQQDqJ8Xl7dJ31DaP6blEfWpAK%2FnFyAEIbuuLlAXtOHzDCHTLFKfBY1NXfO991WM4XO%2ByC2hzl%2F7ENgbbNdajMxucGQYVoDhFtImrrnpBmJ1CUT5yQWqkLYIDLiOM%2FxdtVnl...

The type of rectifier fitted to your machine is a Selenium Rectifier. By all means test it. You might be lucky and it may still be working OK, but with age they do tend to deteriorate and become unreliable, in which case you could fit a replacement silicon rectifier in its place. The wiring shown i...

dave2084 wrote: ↑Fri Nov 10, 2023 4:11 pm One last question for now: what size coin would normally be used for the Award Tokens?

£2 coins work well

Was he called Popeye?

The door should be easy enough to make out of wood & a Lowe & Fletcher lock should fit.
I think this seller also has the direction arrows.
Good luck with it, I'm just up the A52, in Derby.
https://www.ebay.co.uk/itm/256160337587 ... SwRwdjnJI7

Had to do a double take then. I thought it said Joy Suck, which I'm sure would've been a very popular machine, had it been made...

Can you push the reels across, so the payout discs are closer together? If so, you might be able to cure it by putting a washer between the 1st reel & the mech frame.

Look like they've been under the sea.

That's cool, but not £128 cool!

This stuff is also really good at freeing stubborn bolts etc.
https://www.halfords.com/motoring/engin ... 21533.html

Exactly this. I had the same problem on a SEGA recently, and all it required was a small adjustment of the dog & anvil.

The coin tube should be easy to make. You just need a short length of tube of the right diameter for old pennies with a couple of plates welded on. I used 14mm ball bearings in my Jackpot allwin, made by the same company. Backflash looks to be original. As for top flash, give Paul Coppin on here a m...

aristomatic wrote: ↑Thu Aug 24, 2023 1:57 pm Nice full pint of Double Diamond on the artwork would have worked wonders on its distribution

I see what you did, there.

gameswat wrote: ↑Tue Aug 22, 2023 10:19 am"How much did he sell the machines for? Hold on...10 to 15 quid apiece (or roughly $25 usd per slot machine!) in 1975!"