FORUM

So is all this even more reason to have a Coventry auction, with less competition around ?

coppinpr wrote: ↑Mon Mar 29, 2021 9:54 pm machines will start getting removed from Ebay again

Are you suggesting there’s been some sort of skullduggery in the past ?

Cleared the cache and history on my iPad but it’s still zooming in when I change screens.

What do people usually do for their machines regarding replacement back flashes etc? Do you print it on good quality paper/card? Laminate it ?

I have downloaded the 12 win clockface from resources.

All advice welcome.

I’d try Henry Powell, he has loads of spares. I bought a coin mechanism and a bottom door off him for these machines.

They’re struggling to take a photo that’s in focus!

arrgee wrote: ↑Sat Jan 23, 2021 10:04 am Is it the photo, or is the engraving less the sharp?

The words are about 5mm x 10mm, they should have been fitted across the whole piece of plastic !

pennymachines wrote: ↑Fri Jan 22, 2021 10:40 pm Maybe too late to mention: https://www.signomatic.co.uk/signomatic/plasticsign

That’s who made it !

I found a company that makes plastic signs, but they didn’t quite understand what I ordered. The good news is they’re remaking it.

Bryans Clock hand template and score dial

Anybody got a picture of the insides ?

In need of help again ! IMG_8396.JPG IMG_8395.JPG I have this machine and it quite obviously has a broken lever of some kind which connects to the actual kicker. Does anyone have the same machine and can send me a photo of what the kicker should look like ? Also, does anyone know who made these mach...

alan57 wrote: ↑Sat Jan 16, 2021 9:13 am Not sure it helps, but this was the one I had. It wasn't the hand that was broken on mine, it was one of the teeth.

What did you do about the broken teeth ?

Dave I'm looking at the photo of your index disc, there is a nut and bolt and washer holding the adjusting Plate closed. It should not be there. Take this out and the pecker blade will go in Just removed it and the pecker goes in enough to make a 12 coin payout and I think it moves enough to activa...

Thought this might be the case, thanks for your help.

Does anyone know if this is in the resource file (before I start to draw it)?

Lift up the pecker blade from the index wheel, now turn the index wheel until pecker blade will slot into the 12 win position. IF it will only go halfway down the slot, this means only the minute hand is at the 12 o'clock position. Repeat this until the pecker blade goes all the way down. Now the m...

Thank you for that Alan, as there doesn’t seem to be a template anywhere, this helps me to design one myself.

Thanks very much Derek, I’ll give that a try once I’ve made myself a new hour hand. Mine was a bodged tin plate hour hand on top of the original broken one. I was already considering using a 2 part epoxy for ease. Thanks

Thanks Jerry, don’t suppose you know how to set the machine to a jackpot win?