Search found 294 matches
- Fri Mar 23, 2018 11:49 am
- Forum: Open Forum
- Topic: 3D printing machine parts
- Replies: 71
- Views: 42859
Re: 3D printing machine parts
Good morning It wasn't a company that did my 3d printing, just some guy that had one in his basement for hobby reasons. I'm sure if a company did it, they usually only do 100 or 1000s of parts orders only - not 'one of these and two of those'. You could put an ad on GUM TREE... OR kijiji It's a lot ...
- Thu Mar 22, 2018 11:53 am
- Forum: Open Forum
- Topic: 3D printing machine parts
- Replies: 71
- Views: 42859
Re: 3D printing machine parts
Hi Treefrog
No, it's not my machine. What I did was place an ad on a local (buy sell) website and had someone else make the parts.....
Scottie
No, it's not my machine. What I did was place an ad on a local (buy sell) website and had someone else make the parts.....
Scottie
- Tue Mar 20, 2018 11:41 am
- Forum: Open Forum
- Topic: 3D printing machine parts
- Replies: 71
- Views: 42859
Re: 3D printing machine parts
Hi youngergap Yes, all the parts are true. These 3d printers are adjustable so you can print slower and get better quality. At first I was just doing parts that were not under any stress (coin chutes, ball levers etc.) but I tried coin slides and hopper and they worked out just fine. You can use ver...
- Sun Mar 18, 2018 10:55 am
- Forum: Open Forum
- Topic: 3D printing machine parts
- Replies: 71
- Views: 42859
Re: 3D printing machine parts
Hi
If you're thinking of making parts with a 3d printer I strongly agree... They work well and until original parts show up at least the game is up and running.
Have been doing it for a few years now.
Scottie
If you're thinking of making parts with a 3d printer I strongly agree... They work well and until original parts show up at least the game is up and running.
Have been doing it for a few years now.
Scottie
- Tue Feb 06, 2018 8:15 pm
- Forum: Tips and Tricks
- Topic: Flatten a plastic backflash
- Replies: 28
- Views: 19268
Re: Flatten a plastic backflash
Hi Junior
You could try a hot iron with a damp towel. I did this on a top flash and then after I was finished I put the top flash under a heavy flat surface to cool off and it worked great. I'm sure it would work on the backflash, just being bigger it would take a bit more time.
Scottie
You could try a hot iron with a damp towel. I did this on a top flash and then after I was finished I put the top flash under a heavy flat surface to cool off and it worked great. I'm sure it would work on the backflash, just being bigger it would take a bit more time.
Scottie
- Sun Feb 04, 2018 1:04 pm
- Forum: Introductions
- Topic: Hello from Canada
- Replies: 11
- Views: 9428
Re: Hello from Canada
Hi liquorbox.
I'm around 6 hours east down the #401... north of Brockville...
Gee, you're not that far from the Big coin op show in Chicago.... worth the drive.
Scottie
I'm around 6 hours east down the #401... north of Brockville...
Gee, you're not that far from the Big coin op show in Chicago.... worth the drive.
Scottie
- Sat Feb 03, 2018 1:31 pm
- Forum: Introductions
- Topic: Hello from Canada
- Replies: 11
- Views: 9428
Re: Hello from Canada
WELCOME....
CANADA EH... it's a big country... I'm in the Ontario part.
Scottie
CANADA EH... it's a big country... I'm in the Ontario part.
Scottie
- Wed Jan 03, 2018 1:41 pm
- Forum: Let's Talk about Slots
- Topic: The Wonders List
- Replies: 116
- Views: 75601
Re: Same thing only different: Wonders Nine Pins
I was just looking around the inter-web ...only found 3 different pictures of the NINE PIN ....and all 3 had the single cups below the one row of cup... Maybe mine's the rare one-of-a-kind.
Scottie
Scottie
- Wed Jan 03, 2018 1:09 pm
- Forum: Let's Talk about Slots
- Topic: The Wonders List
- Replies: 116
- Views: 75601
Re: Same thing only different: Wonders Nine Pins
Thank you for your imput...
I'll have to check E C website to see if there are others and which ones they are....
Scottie
I'll have to check E C website to see if there are others and which ones they are....
Scottie
- Sat Dec 30, 2017 1:33 pm
- Forum: Let's Talk about Slots
- Topic: The Wonders List
- Replies: 116
- Views: 75601
Re: Same thing only different: Wonders Nine Pins
So is the one I have the odd duck...or is it the other way around.....
So who gets new year's first...ha ha
Scottie
- Fri Dec 29, 2017 1:31 pm
- Forum: Let's Talk about Slots
- Topic: The Wonders List
- Replies: 116
- Views: 75601
Same thing only different: Wonders Nine Pins
Hi all I hope everyone in the U.K. (and the U.S.A.) had a great Christmas Just wondering, I saw this Wondermatics Nine Pins on ebay and noticed it had one row of cups and 4 single cups under that. I picked up a Nine Pins this year and mine has two rows of cups and no single cups. Any comments why wo...
- Thu Sep 28, 2017 3:21 pm
- Forum: Tips and Tricks
- Topic: Rust off with wire wheel
- Replies: 3
- Views: 4430
Re: Rust off with wire wheel
thank you Widget2k4 well i think im all done,just have to bum a few cig off someone and test it out that the cig drop properly. what a day yesterday, i was mounting the cig vender in the allwin not a big deal at all,but then i had to connect the vending part to the knob linkage ...so when you turn t...
- Tue Sep 26, 2017 10:26 am
- Forum: Tips and Tricks
- Topic: Rust off with wire wheel
- Replies: 3
- Views: 4430
Rust off with wire wheel
Just goes to show you, no matter how must rust is on a machine, anything is possible.
Works like a charm, just have to install it in the machine and I'm done and on to the next one, thanks to the wire wheel on my grinder.
Scottie
Works like a charm, just have to install it in the machine and I'm done and on to the next one, thanks to the wire wheel on my grinder.
Scottie
- Tue Sep 12, 2017 11:28 am
- Forum: Discoveries
- Topic: Found this Allwin in Vermont!
- Replies: 6
- Views: 3629
Re: Found this Allwin in Vermont!
Hi Paccii and welcome
This machine was on ebay a few weeks ago. The guy selling it was in California and had two machines for sale this one and a Wondermatic Nine Pin. So somehow it's made its way to Vermont....
The reason I know this is I bought the Nine Pin.
Scottie
This machine was on ebay a few weeks ago. The guy selling it was in California and had two machines for sale this one and a Wondermatic Nine Pin. So somehow it's made its way to Vermont....
The reason I know this is I bought the Nine Pin.
Scottie
- Wed Aug 23, 2017 11:00 am
- Forum: Questions and Answers
- Topic: Wall Machines
- Replies: 21
- Views: 8657
Re: Wall Machines
Hey there nvmos2
There is one serious serious buyer in the U.S. (So far, no serious offers from the US forum.) And he's STILL waiting for inside pictures, imformation and price range .....?
Scottie
There is one serious serious buyer in the U.S. (So far, no serious offers from the US forum.) And he's STILL waiting for inside pictures, imformation and price range .....?
Scottie
- Sun Aug 20, 2017 3:14 pm
- Forum: Questions and Answers
- Topic: Wall Machines
- Replies: 21
- Views: 8657
Re: What are they ?
Hi Special When Lit
Yes, I was thinking the same thing. I had heard that they don't work well and the coins jam a lot. Not sure how much of that is true. I have never owned one.
Can't wait to see the inside pictures. Hopefully it's still all original and not messed with.
scottie
Yes, I was thinking the same thing. I had heard that they don't work well and the coins jam a lot. Not sure how much of that is true. I have never owned one.
Can't wait to see the inside pictures. Hopefully it's still all original and not messed with.
scottie
- Sun Aug 20, 2017 11:44 am
- Forum: Questions and Answers
- Topic: Wall Machines
- Replies: 21
- Views: 8657
What are they ?
Hi
I have a chance to pick the two of these up and was wondering who made these and ,how old they are ?
it looks like the coin slot is smaller than the large penny.
Im just waiting for inside pictures.
How were these played ?
Any help would be great
Thank you
Scottie
I have a chance to pick the two of these up and was wondering who made these and ,how old they are ?
it looks like the coin slot is smaller than the large penny.
Im just waiting for inside pictures.
How were these played ?
Any help would be great
Thank you
Scottie
- Thu Jul 27, 2017 3:02 pm
- Forum: Questions and Answers
- Topic: Bryans Elevenses round & square coin cups
- Replies: 4
- Views: 1701
Re: Question about Bryans Elevenses
Interesting, I was thinking it was the other way around and the square one was older and the round ones were newer... Thank you treefrog, bryans fan and Mr pennymachines... and at 2.00 each I'll take a dozen ...wow that's a great deal there - 29.00 now.
scottie
scottie
- Thu Jul 27, 2017 11:44 am
- Forum: Questions and Answers
- Topic: Bryans Elevenses round & square coin cups
- Replies: 4
- Views: 1701
Bryans Elevenses round & square coin cups
Hi all
Just one quick question.
I was looking at a Bryans website and noticed that most of the Bryans Elevenses had a round pay-out bowl all but one which had a square pay-out bowl. Is this original? Maybe just an older version?
Any input would be great.
Thank you
Scottie
Just one quick question.
I was looking at a Bryans website and noticed that most of the Bryans Elevenses had a round pay-out bowl all but one which had a square pay-out bowl. Is this original? Maybe just an older version?
Any input would be great.
Thank you
Scottie
- Wed Jun 07, 2017 12:01 pm
- Forum: Tips and Tricks
- Topic: CNC made parts
- Replies: 2
- Views: 3985
Re: CNC made parts
Thanks tree frog
Scottie
Scottie