FORUM

I need a set of ally feet for a machine if you can help.

Would you stick with the plain case as blueprint, polished brown or be more imaginative ?
Do you think the legs fold? Can't figure that and the coin box hanging underneath.

I suppose it's best to follow the plan and make it as original as possible.

It will be something solid !!THUMBSX2!! and I found a side panel with an image on it, completely shot and full of worm. Just hope I can jam it in my scanner, or I'll have to resort to image transfer and bucket of water... The horse has got 1 leg and a headless rider, same as blueprint, lead, I think...

Unfortunately, it is a ply front panel, but now you have sent the design which is a plain case, all ply, I think, I will make something that will complement it. Only real problem I can see is how to keep the balls in the case. I thought they ran in the tracks, not on top, as the drawings show. I gue...

Thanks, great help. Found the game instruction panel, unfortunately rust deteriorated. It reads, Place penny in coin slot and push in. Pull lever out fully. Depress lever on left or right side to release game ball. - best i can make out. The balls release at the front bottom on left and right held i...

This has a hinged bar on the left and right side which lifts so you can control ball speed, not the sprung type. Would it be a table top machine or on legs would you think?

Had this part machine for a while. Looks like coin slot releases balls that ran along track left and right side then through hole down track and nudge a horse. I have no case and would appreciate info on what it looks like. I have a horse on a bar that ran in a narrow track. I don't have the part th...

i found something close on ebay 19mm barrel item 121062687691 dirt cheep that will do until a real one comes around thanks

slotalot wrote:Just found this on Ebay...not sure if it's what you want

This is close but barrel size is a bit small. I'll ask the seller on ebay if he sells larger ones. Thanks for the link.

Yes, it's the same type of back on the piano with the latches but only the normal key hole and not the round barrel that fits through the hole. Roll top desk locks are similar as well, but pretty useless without the round important part. Also some sewing machine boxes have the catch part.

Any idea where to get top door lock for crane case piano style lock with 2 hooks that come out with a round barrel?

funky wrote:I know Clive Baker has just vacated his penny arcade on the pier...

Most of these machines are now at Milestones museum in Basingstoke, approx 80... but the tram race and a few others are in Southport near Morrisons. They are all available to play.

Have you seen this site?
https://chomickmeder.com/

What else have you done or got planned? Made this Marathon Cycle case about a year ago. Sorry the pictures aren't the best quality . A singing Marilyn Monroe doll is in the design stages at present. Standing on a grate with a fan blowing up her dress - bit of a strange one possibly, but I'm sure I'...

This model works on old penny and runs on 12v.

Hi all,
I'm new on here. I make and restore all sorts.

This model works on old penny and runs on 12v.

Hope you like it. Comments welcome.