FORUM

OK Paul, as you crank the mech, just do this slowly and check the movements of each linkage, to see if anything is binding. Looking at your mechanism it looks pretty clean, but I can't see any signs of lubrication. Also have you checked the center spindle to see if this is running free and true.

On mine Paul, the pin is in the bottom hole,
Have you tried to crank the mech now it's out of the case.

Paul, can I just ask, when you got this machine did it have coins in it?

Thank you Paul, for the photos, but if you would please, can you post a photo of the full front of the
Mech,

OK Paul,
Next step, take the mech out of the case, just 3 nuts to undo, then if you will take photos of front and back, just so we can have a look to see if we can see anything obvious. as said earlier very robust machines, but it may have been dropped.

Hi Paul, Have you had the mech out of the case, I'm asking because if it is put back in without aligning the spindle on the mech with the cast loop on the back of the turn key this can cause problems. Look inside the back of the case and you should see the spindle, if positioned correctly should be ...

Hi Rick To set up your jackpot, try this - it worked for me: First check your jp is in the closed position; now disengage the the pecker blade from the index wheel; rotate the index wheel to the 12 win position and insert the pecker blade. If the pecker blade is now half way down the slot, look at t...

I want one.

Hi thomas911
Can you let us know if you purchased this machine with the problem or has it suddenly started?
On your Bingolett, what is the highest payout and what coinage?
Does it pay anything on highest win or nothing at all?
Best regards Derek

Well done Paul, thank you for your hard work.
Best regards Derek

Hi cait001
Glad the rialto is all up and running I'm sure you will have lots of fun with it.thankyou for posting the link very informative.
Derek

I collected the battered BM Co Cresta Run today. The chap told me he had it for 30 years. 10 of those years it was on an outside wall :!?!: . Of course the case has had it. I knew I would have to make a new one. This I will do and I will try to be as close to original as I can. Suprisingly, the mech...

Thanks coppinpr.

Hi coppinpr
I must be doing something wrong sending you a pm. Could you please send me one and I will try to reply. Thanks.

Thanks Bp for your post it was probably my fault for not explaining myself correctly.

Thanks for all your replies i dont know if this helps it pays
20 coins as well as the jp.
The way this is set up is not every ones taste but we like it especially the grand kids.
Thanks Derek
Hi coppinpr I've sent you a pm

Thank you for your advice.
Hi coppinpr, yes, I am interested. I will be in touch.

Can anyone tell me if there is an award plate for a Mills high top that reads, '3 bell fruits anywhere in the window pays jackpot'? Please forgive me if this is a silly question but I am a novice so I am still learning. I should mention that when I purchased this it did not have a jackpot. But I had...

Hi Alan55 I have some tubing 34mm id 35mm od about 600mm in length. It is mild steel chromed I am working in Southport for the next 2 weeks if you're interested F.O.C. The Bryans clock I bought from you is still working fine, never skipped a beat, also the chrome on the clock is still perfect. If yo...

Thank you very much coppinpr

The stop posts (bumpers) have a rubber grommet over them to bounce the ball into the playfield.
The size of lamps for the numbers are 30mm qty 28.
In the playfield these are 36 mm qty 7.
There are 3 sizes originally but I could not find the other size in LED but the 36mm works fine.