Show us what you found. Make us jealous!
deano67
Posts: 84
Joined: Wed Aug 30, 2017 9:28 am

Re: Gumball and collector's card vendor 1D

Postby deano67 » Wed Jun 19, 2019 4:15 pm

Yes same as mine inside - thanks special when lit. Next job getting the right size/thickness cards for it! Anyone have any?
cheers

User avatar
pennymachines
Site Admin
Posts: 4872
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Oak Manufacturing Co. Premiere Card/Gum & similar vendors

Postby pennymachines » Thu Jun 20, 2019 1:10 pm

I see another of these (as well as a Premiere) sold way back in the May 2005 Southern Counties auction:
A9.JPG
B14.JPG

User avatar
special when lit
Posts: 238
Joined: Fri Dec 17, 2004 4:46 pm
Location: Derby

Re: Gumball and collector's card vendor 1D

Postby special when lit » Thu Jun 20, 2019 3:26 pm

deano67 wrote:
Wed Jun 19, 2019 4:15 pm
Yes same as mine inside - thanks special when lit. Next job getting the right size/thickness cards for it! Anyone have any?
cheers
Mine only had 4 cards in. There's a box of them doing the rounds at the auctions, I tried to buy them, but they went too high.
P1010582a.jpg

swmeters
Posts: 1
Joined: Tue Mar 24, 2020 2:32 pm

Re: Oak Manufacturing Co. Premiere Card/Gum & similar vendors

Postby swmeters » Tue Mar 24, 2020 2:37 pm

Hi,
I also have a Vintage Oak Vending machine (1956 ? )
The problem I have is:
#1... I am not a computer kind of person.
#2 I cannot find out anything about what Model I have.
Looking to refurbish it ...but don't even have a parts breakdown on it to see what I might require for parts.
It does dispense cards, one per side.
Not sure what coin config. it is.

Really could use some guidance on finding more out about what I have.
Thanking you in advance.

User avatar
coppinpr
Posts: 3950
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Oak Manufacturing Co. Premiere Card/Gum & similar vendors

Postby coppinpr » Tue Mar 24, 2020 3:03 pm

photos are the key!! we love photos, easy to up load (just ask if you need help) and response will be much better

User avatar
pennymachines
Site Admin
Posts: 4872
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Oak Manufacturing Co. Premiere Card/Gum & similar vendors

Postby pennymachines » Tue Mar 24, 2020 7:18 pm

I posted the above for swmeters and sent him the 'how to post images' link.
swmeters wrote:I found pics. of a torn-down Vending machine from a rebuild by coppinpr.
It is the same as what I am working on.
I would like to know what drives the card sliders back and forth. It seems I'm missing a connection to the gear that would rotate the levers.
Would anyone know where I could get this part? Or have a pic. of what it looks like?


Who is online

Users browsing this forum: No registered users and 7 guests