Head Ball, Swing It, It's Easy, Steer-A-Boat, British Tank
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Head Ball, Swing It, It's Easy, Steer-A-Boat, British Tank
My www.penny-arcade.info site has recently acquired what is sometimes referred to as "the Holloway collection" of early slot machine photos. These will form a new section on the website. At the moment I'm scanning the negatives and doing what I can to repair and improve the quality, some are very poor, many of the photos are over 75 years old, some of the photos are photos of older photos (and many of the machines in the photos are much older) every scan reveals another rare machine but these two really caught my eye today, I've never seen the like, anyone have any details? Head Ball?? two gangs of metal men appear to try and head the large ball into the other player's net? while the other machine puts a new meaning to the word "TILT".
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: I'd like to know a little bit more about these two machines
The Head Ball was made by London Automatic Machine Company in 1926 (page 140, Nic Costa's Automatic Pleasures). As can be seen by the delivery hole in the backdrop, the ball is large, and bounces over the footlallers' heads as they bob up and down, controlled by the two levers. Clive operates one, and there are a few others scattered around in collector hands. We have previously discussed Stevenson & Lovett's Swing-It. Very few seem to have survived.
Re: I'd like to know a little bit more about these two machines
There was a Head Ball in Mablethorpe in the 70s. I can't quite remember which arcade at the minute. Likely Jacksons Radio. Played it a few times.
Re: I'd like to know a little bit more about these two machines
Yes, we operated the Head Ball at the Manchester Football Museum. It's an interesting concept but the game is over far too quickly usually only within several seconds. However it's far better than any of the footballers for taking money as the footballer machines look nice but the game can go on and on and even have the ball abandoned whilst still in play sometimes, as players (especially younger ones) get bored.
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: I'd like to know a little bit more about these two machines
Is there something missing from this machine? If not, how does the ball get to the playfield
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: I'd like to know a little bit more about these two machines
"It’s Easy" - the ball shoots up the covered metal channel on the far right of the playfield to enter the loop. These vertical bagatelles, made by Bollands and BMCo. are dropcase games, not allwins. See Pin Royal in the Museum.
Re: I'd like to know a little bit more about these two machines
First, congrats on the pictures! I can't wait for the new site section to be revealed.
Any idea what the gameplay of Swing It is? Does the wheel tilt the playfield left and right?
Any idea what the gameplay of Swing It is? Does the wheel tilt the playfield left and right?
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: I'd like to know a little bit more about these two machines
See the link posted above by Mr P.Any idea what the gameplay of Swing It is? Does the wheel tilt the playfield left and right?
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: I'd like to know a little bit more about these two machines
Here are three very sad photos... Try not to cry and before anyone asks for the address, these photos are over 30 years old.
Re: I'd like to know a little bit more about these two machines
Sad indeed, but look on the bright side - if they did rot away or were scrapped as many were 40 to 50 years ago, then machines that have survived become more sought after with values increasing year on year.
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: I'd like to know a little bit more about these two machines
Here are two odd large case machines, the first from the same maker as Polo etc. I'm sure the forum has discussed it before but I've not seen it before. Single-player and a machine that would seem full of problems for the operator. Like the "ant viewer", too much trouble for the average operator. Does anyone know how the boat was controlled? Magnets?
The second, "The British Tank", I suspect was a refurbished machine using an earlier case? Not sure what the tank did but I believe the tank moved and there was a shooter aspect?
-
- Posts: 158
- Joined: Tue Mar 24, 2015 11:33 am
- Reaction score: 5
Re: I'd like to know a little bit more about these two machines
The Steer-A-Boat did work with a magnet. On the bridges was a snag to catch the aerial on the boat as it passed through, meaning the boat stopped and the magnet moved on without the boat. I had one of these machines in a wooden case similar to the Ahrens football two player game with an enamel marque. The main problem was water evaporation, so I ran mine on light oil. This was the only one I knew to survive.
These Ahrens machines were often made in very small numbers and if unsuccessful maybe not added to a prototype. I sold/swapped mine with a well known collector in California who also owns part of the tank game. However, I do not know how the game worked. He did contact me to see if I could help when he bought it to ask if I knew anyone who had a complete game. I did not, but sent him a copy of the picture you have.
These Ahrens machines were often made in very small numbers and if unsuccessful maybe not added to a prototype. I sold/swapped mine with a well known collector in California who also owns part of the tank game. However, I do not know how the game worked. He did contact me to see if I could help when he bought it to ask if I knew anyone who had a complete game. I did not, but sent him a copy of the picture you have.
Who is online
Users browsing this forum: No registered users and 17 guests