Page 1 of 1
Ball Past Arrow Backflash
Posted: Sat Sep 17, 2011 8:21 am
by slotalot
Hidden Content
This board requires you to be registered and logged-in to view hidden content.
Hi
I have just finished working on a Brenner Ball Past Arrow machine, I had to make a new backflash as the old one was well past its best, Because of the silver paint I had to do most of it by hand, Here is some of the artwork I used as templates, It may be of use if you have to make one for your machine
Re: Ball Past Arrow Backflash
Posted: Sat Sep 17, 2011 4:35 pm
by cheeky
Clever chap!
Ball Past Arrow flash
Posted: Tue Dec 13, 2016 9:40 pm
by pennymachines
Topic merged - Site Admin.
Widget - here's the best of the pics I took for you of the Skill Fun flash, with inevitable, shadows, reflections etc. Sorry, I only just remembered it.
IMG_2136a.jpg
I'm awaiting the arrival of the machine below (same backflash version) within the next week. Because of the damage, my plan would be to remove the flash and scan it on the flatbed for digital copying and fixing. Don't know when this will happen though...
ripped-flash.jpg
Re: Ball Past Arrow flash
Posted: Tue Dec 13, 2016 11:00 pm
by widget2k4
thank you mate
Re: Ball Past Arrow Backflash
Posted: Mon Sep 23, 2019 10:32 am
by gameswat
Just found this circa 1937 early model backflash artwork on a hard drive. I cleaned and flattened this original when restoring the machine years ago, but before I put it back I photographed it.