Graphics, flyers, instructions and other materials.
You could just measure the space of two nail holes on your machine if you threw the old damaged label away, then size the art above to suit and print out.bryansshort wrote: I'm in with a chance now if I can print off a patten of the right dimensions. Do you have more dimensions you can post please, width, radius of the rounded ends, distance of the black border from the edge and material thickness? I'd be much obliged.
- Site Admin
- Posts: 5048
- Joined: Wed Nov 06, 2002 12:12 am
- Location: The Black Country
If you scale the image so that the width from end to end is exactly 2" you will have all the other dimensions. The material thickness of the first label I posted is about 1mm. I originally marked the pinholes on the image but removed them, because you don't want to be making new holes in your cabinet. As Gameswat says, you puncture the label to the existing cabinet holes.
Users browsing this forum: No registered users and 4 guests