Metal Form Products Co.

badpenny · Post by **badpenny** » Wed May 26, 2010 5:48 pm

Metal Form Products Co‎
13052 Raymer Street, North Hollywood, CA 91605-4213, United States
(818) 764-2680‎

I last dealt with this company about three years ago, I've been trying to contact them recently at their compuserve e-mail address to no avail.

Has anybody any news on them or an up to date e-mail address please?

Badpenny

The Grabber · Post by **The Grabber** » Wed May 26, 2010 7:33 pm

I have used them in the past for parts and transfers but I can't find the contact details.
I think the man who owns Crow River knows them.

Guest · Post by **Guest** » Wed May 26, 2010 7:56 pm

In answer to Badpenny's question, their email has changed to:-
mfpcomp at msn.com
Let us all know if you get a reply, as I am still waiting for mine, but it is 100% the right address!!

badpenny · Post by **badpenny** » Wed May 26, 2010 8:17 pm

Thanks chap, I'll try that .............

badpenny · Post by **badpenny** » Wed May 26, 2010 8:23 pm

Thanks Grabber, first I'll try mfpcomp at msn.com as suggested by Guest, if that doesn't work I'll talk to Crow River dude, he may have what I'm looking for anyway..........

badpenny · Post by **badpenny** » Thu May 27, 2010 1:35 pm

That was quick, I got a reply from Jack using the mfpcomp at msn.com address.

The Grabber · Post by **The Grabber** » Thu May 27, 2010 8:07 pm

He emailed me as well and he is going to send me his lastest catalogue.

badpenny · Post by **badpenny** » Thu Jun 10, 2010 9:25 am

Guest wrote:Let us all know if you get a reply, as I am am still waiting for mine, but it is 100% the right address!!

Jack was as good as his word - the new MFP catalogue landed today. I must laminate it before I get dribble marks all over it.

treefrog · Post by **treefrog** » Sun Aug 29, 2010 12:46 pm

I have not tried Metal Form Products and may now need to as another excellent source of slot machine spares Krahl Klassics in Illinois appear to have gone out of busniess, or at least they have not renewed their domain name and email service.

andydotp · Post by **andydotp** » Wed Sep 05, 2012 8:55 am

Isn't this opening page rather dated now,,,, and why can't I get into The Arena?
andy.

badpenny · Post by **badpenny** » Wed Sep 05, 2012 10:47 am

andydotp wrote:Isn't this opening page rather dated now,,,, and why can't I get into The Arena?
andy.

This isn't an opening page Andy, I guess it's the page you were on when you bookmarked it?
I've logged mine as Forum so I can just hit "View New Pages"

Have you subscribed to Arena? or perhaps if a year has gone by you need to renew your subscription to it?

How's work going?

pennymachines · Post by **pennymachines** » Wed Sep 05, 2012 12:06 pm

Hi Andy,
Sorry about that - it's fixed now. Please see Arena subscription problems
As BP says, this old thread is only at the top 'cause you just posted to it!

andydotp · Post by **andydotp** » Thu Sep 06, 2012 7:50 am

Thanks chaps,
Apols, not very good with this new-fangled interweb or computer stuff and it's so hard to buy typewriter ribbons these days, plus putting stamps on envelopes to respond to emails etc...
Work's pretty busy thx BP with my 22 construction sites on the go and all. Problem, as always though, is 'who I'm doing it for'....
And I did Paypal two quid a while back so'll jump to The Arena in a mo.
Best to all,
a dot p

chief · Post by **chief** » Thu Sep 20, 2012 1:26 am

Topic merged - site admin.

Jack
Metal Form Products Co.
11128 CHRISTY AVE.
LAKEVIEW TERRACE 91342
CELL PHONE: 818 764-2680 Califorina U.S.A. Time
Best to call in Morning.

badpenny · Post by **badpenny** » Thu Sep 20, 2012 9:37 am

Welcome to our forum Chief, pull up a rusty bandit, have a cup of tea and a biscuit and tell us all about yourself.

Are you here or from over there?

Badpenny

pennymachines · Post by **pennymachines** » Thu Sep 20, 2012 4:02 pm

I've updated the contact details in Archive/Services.

raj · Post by **raj** » Fri Sep 21, 2012 10:30 pm

just found some scary photo's on a casting site in the US http://castmetalparts.com/How_To_Sand_Cast.htmlwhich would not look out of place in the Soprano's.

badpenny · Post by **badpenny** » Sun Sep 23, 2012 10:38 am

Have a care ....... you're talking of the woman I love.

giles_gunning · Post by **giles_gunning** » Wed Oct 31, 2012 9:57 pm

For anyone who couldn't contact the guy by email... here is the catalogue well pictures anyway
http://rwatts.cdyn.com/download/metal%2 ... 0products/

marktol · Post by **marktol** » Thu Nov 01, 2012 9:01 am

Thanks Giles,

Another alternative to Mr Slot there. Looks like reasonable prices too.!

Cheers,
Mark

FORUM