General vintage slot machine related topics.
bellbox12
Posts: 1
Joined: Sun Sep 08, 2013 3:34 pm

Sega Bonanza

Postby bellbox12 » Sun Sep 08, 2013 3:39 pm

Hi...just bought my first machine from Elephant house auctions. I need to know how to get the mechanism out of the casing. Can anyone help?

User avatar
coppinpr
Posts: 3714
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Sega Bonanza

Postby coppinpr » Mon Sep 09, 2013 7:49 am

hi and welcome to the best slot forum on the net...by far.
Dont forget we love photos,if pos always post photos ,it helps us a lot to deal with your problems (plus we just like photos :D )

So you have a sega bonanza, to remove the mech
remove the back door
release the two side retainers at the top and remove the top bonnet
there may be a hand bolt holding the mech to the base plate at the bottom but more likly there are two retainers(one on each side of the case) these move up and then the mech is free to move
grab the mech by the main cross bar,slightly lift and pull backwards, change your grip to eachside of the mech and carry,puffing and blowing to the dining table and make a mess putting it down :didact: .

then ask again about cleaning ...we love to help :cool:

User avatar
coppinpr
Posts: 3714
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Sega Bonanza

Postby coppinpr » Mon Sep 09, 2013 8:11 am

here is a photo of a bonanza star to make it clearer
a = bonnet retainers
b = hand bolt (if present)
c = side retainers (if present)
info.jpg

User avatar
badpenny
Forum Moderator
Posts: 5957
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Sega Bonanza

Postby badpenny » Mon Sep 09, 2013 8:37 am

Untitled.png
Paul's machine also has the original clamp (circled) that also needs dropping. It's hinged at the bottom and swings clear, it's astonishing how securely it holds the mechanism to the base plate in the case.
They're often removed, I'd had a couple or three of these before I came across one and nearly gave my hernia a hernia trying to get the mech out before I spotted it.
Likewise you can't put the back door on without having re hooked it up, I fell for that one as well.

BP

User avatar
treefrog
Posts: 3280
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Sega Bonanza

Postby treefrog » Mon Sep 09, 2013 5:40 pm

I bought that fine looking mills console machine JC was selling in the market and when collecting we both struggled to get the mech out as it had an unusual sprung loaded locking mechanism I have never come across before...will post pics when I can...


Who is online

Users browsing this forum: No registered users and 2 guests