No doubt it will have the usual minor defects, as others have said. If it is your first Aristo, be aware that the door can slam shut and, if the key is missing, you will may have to drill the lock, unless you are lucky and the door is a sloppy fit, then try and manoeuvre the cabinet to 45 degrees and wobble or prise the door open!! If you are stripping, I would remove the front glass panel and the ali cash drawer so you can still access the locking mechanisms as they jam fairly easily. Cash box locks have a good bit of adjustment and a standard 28 mm should fit. If the circular operating disc is damaged after drilling, easy fix using a 2p or 1D coin with 2 slots cut in and the right shape hole drilled and filed. The main door needs a short thread, not so common, but still not dear.