General vintage slot machine related topics.
User avatar
radiochrissie
Posts: 133
Joined: Sun Oct 10, 2010 7:03 pm
Location: The Iron Men, Crosby
Contact:

Fixing payout slides together

Postby radiochrissie » Thu Aug 23, 2018 8:41 am

Hi, I need to make a single payout slide for 5 old pennies. I have slides for 3 and for 2. Barring spot welding them is there any other way of doing it !PUZZLED!

User avatar
treefrog
Posts: 2940
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Fixing payout slides together

Postby treefrog » Thu Aug 23, 2018 8:54 am

I would not weld, they only need a minor fixing. I have come across so many that rather than modify for 12 coin payout they would lock together the slides with either small bolt at the front edge or a copper rivet. This has allowed me to return to full 20 coin payout on a number of machines. Seen often on older Mills mechs....if position in Center and file down should not affect action. If I get to one I can take a picture

User avatar
badpenny
Forum Moderator
Posts: 5735
Joined: Thu May 05, 2005 12:41 pm
Location: West Midlands
Contact:

Re: Fixing payout slides together

Postby badpenny » Thu Aug 23, 2018 11:15 am

TF, does that then require modification of the relevant horizontal fingers, or does the top paying vertical one have an elongated tab to knock both the upper horizontal ones out of the way?
Sometimes I wonder if I'm the only one who can picture what I'm saying. !PUZZLED!

BP :cool:


Who is online

Users browsing this forum: dutchboy and 2 guests