Jennings Light Up

General vintage slot machine related topics.
Post Reply
User avatar
gooner1720
Posts: 12
Joined: Sun Feb 21, 2010 1:54 pm

Jennings Light Up

Post by gooner1720 »

Hi,
Does anyone know where I can get replacement red front panels for a Jennings light up slot machine? Mine are okay but a bit discoloured and stained. Thank you, Adrian.
User avatar
coppinpr
Posts: 4280
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Jennings Light Up

Post by coppinpr »

They are available in the US but they are expensive and quite thin. I have had some success with very poor ones by spraying them from the inside and outside.
Photos show the faded plastics, sprayed lights off, sprayed lights on.
Attachments
finished1.jpg
lights on.jpg
plastics.jpg
User avatar
gooner1720
Posts: 12
Joined: Sun Feb 21, 2010 1:54 pm

Re: Jennings Light Up

Post by gooner1720 »

Hi,
Thank you for that. It’s an option I could try. The ones I need are from a Sun Chief so only two pieces. I have seen some in USA (pictured) but, as you say, they are expensive. Mine are passable so not a problem if I can’t get replacements.
Attachments
21598BF7-D619-4126-B039-6DD31CA1910Fa.jpg
User avatar
brigham
Posts: 819
Joined: Tue Oct 31, 2017 3:37 pm

Re: Jennings Light Up

Post by brigham »

You could use RED lights, which would improve things greatly. If not, red theatrical gel sheet BEHIND the panels may serve.
oscarnl
Posts: 2
Joined: Wed Nov 25, 2020 2:16 am

Re: Jennings Light Up

Post by oscarnl »

coppinpr wrote: Sat Oct 06, 2018 9:29 pm They are available in the US but they are expensive and quite thin. .

I am looking for replacement ones too, but cannot find them anywhere online (even in the US). Would anyone be able to point me in the right direction for a location?
User avatar
treefrog
Posts: 4028
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Jennings Light Up

Post by treefrog »

I have a few sets of light up panels, green and blue I think.

You will never get original good Jennings panels now, unless you pay £300+ And probably much more....

Most that have been sold over the years are later reproductions....which mine probably are, but look good. Need to get around to using them....
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests