General vintage slot machine related topics.
User avatar
geordy55
Posts: 102
Joined: Wed Apr 19, 2017 8:33 am

Columbia DeLuxe Jackpot Setup

Postby geordy55 » Sat May 18, 2019 12:55 pm

I bought this little Columbia Deluxe recently and it all worked fine until I forced a jackpot with the mechanism out of the case. All worked fine, but when putting the mech back into the case, I cannot get the jackpot to fall again.
On the following photo you can see the push rod which I believe holds the jackpot under pressure until released on a jackpot win, when it retracts and releases the coins.

IMG_6074.JPG

I have two scenarios regarding the jackpot mechanism itself. The first is how it was set up when I bought the machine.the second is from a similar machine. Which one is correct ?

In the following photo you can also see how the push rod appears to miss the jackpot mechanism, but if I put this pin in front of the push rod then the mechanism will not go into the case.

IMG_6078a.jpg

Does anyone know, or can anyone explain how the jackpot should work and reset ? Does anybody have a service manual that can help ?

Any help really appreciated.
IMG_6076.jpg
IMG_6075.JPG

User avatar
coppinpr
Posts: 3675
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Columbia DeLuxe Jackpot Setup

Postby coppinpr » Sun May 19, 2019 7:18 am

I think your set up is the correct one,i cant check my machine at moment as im on vacation but ill check it when i get back so we can at least have a "best of three", BP seems to know more about these than anyone so im sure he will be along with the answers

User avatar
badpenny
Forum Moderator
Posts: 5906
Joined: Thu May 05, 2005 12:41 pm
Location: West Midlands
Contact:

Re: Columbia DeLuxe Jackpot Setup

Postby badpenny » Sun May 19, 2019 9:42 am

Paul, you've already supplied Geordie with photos of yours so he could confirm the spring/hinge arrangement.
Geordie only lives around the corner from me so we spent an exciting couple of hours going over the thing in my back room. I suggested he ask you for a photo of yours as I remembered nursing yours for a year (because when you're not on holiday you're still hundreds of miles from civilisation)

Basically his worked until he mended it.
The hinge pin on the J/P is spring loaded, but one end of the pin wasn't located correctly into its bracket.
Having put it back it stopped releasing.
It's a combination of ……..
Getting J/P allows the pay out pin to travel beyond the side frame though a small spring loaded door.
Upon which it knocks away the retaining arm that holds the J/P closed, so it releases.
Only it doesn't now.

Geordie ….. I've been puzzling over this (I know, I need a hobby, problem is I have one!!!) I wonder now about the cash box that holds the J/P closed when you remove the mech so it doesn't trip when you take it out. Check that it does indeed do that fully. For if it doesn't hold the catch off then there will be too much pressure on the catch when the pay out pin tries to release it.

If as I suspect, I'm talking gibberish and not putting into words what I can see in my head, give me a shout and I'll pop round, it's worth a try.

BP :cool:

User avatar
geordy55
Posts: 102
Joined: Wed Apr 19, 2017 8:33 am

Re: Columbia DeLuxe Jackpot Setup

Postby geordy55 » Sun May 19, 2019 12:52 pm

BP, the money box easily pushes the retaining arm out of the way. In the photos the first set up is the same as Coppins photo, the second set up is how mine was. The first set up holds the jackpot in place when the retaining arm is lifted by the money box. The second set up does not appear to hold the jackpot door closed when the retaining arm is lifted. In both scenarios the push slider does not align with the pin on the mechanism (which should keep the jackpot closed) it misses it completely and therefore does not hold the jackpot closed.

Has anybody else got a Columbia they could take a photo of for me?

User avatar
geordy55
Posts: 102
Joined: Wed Apr 19, 2017 8:33 am

Re: Columbia DeLuxe Jackpot Setup

Postby geordy55 » Sat Jun 08, 2019 8:14 pm

Ok, just to update anyone who’s interested, I managed to work out how the jackpot mechanism should be fitted. The photo below shows the correct set up and the jackpot now works and re-sets itself perfectly. When I got the machine, this black bracket was not fitted into the pivot pin and was also bent.
BAA452F8-91A5-4BBE-A37B-00E929EC302a.jpg

User avatar
badpenny
Forum Moderator
Posts: 5906
Joined: Thu May 05, 2005 12:41 pm
Location: West Midlands
Contact:

Re: Columbia DeLuxe Jackpot Setup

Postby badpenny » Sat Jun 08, 2019 9:54 pm

Well done Geordy!

BP !THUMBS!

User avatar
coppinpr
Posts: 3675
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Columbia DeLuxe Jackpot Setup

Postby coppinpr » Sun Jun 09, 2019 8:11 am

Yes, very well done - perseverance pays off. !!IDEA!!

User avatar
geordy55
Posts: 102
Joined: Wed Apr 19, 2017 8:33 am

Re: Columbia DeLuxe Jackpot Setup

Postby geordy55 » Mon Jun 10, 2019 11:39 am

Just bought another from the US. It's not running but I quite like these mechanisms so will be a challenge to get it working again.
If anybody knows of anyone with spares I'm looking for the carousel cover and the coin chute as a start.

User avatar
geordy55
Posts: 102
Joined: Wed Apr 19, 2017 8:33 am

Re: Columbia DeLuxe Jackpot Setup

Postby geordy55 » Mon Jun 17, 2019 11:16 pm

Well after a total strip down, and numerous rebuilds, I now know these machines inside out. Managed to get a very stock clogged up mechanism working again but had to manufacture a new coin detector.
Does anyone have any spare parts for a Columbia ?

User avatar
badpenny
Forum Moderator
Posts: 5906
Joined: Thu May 05, 2005 12:41 pm
Location: West Midlands
Contact:

Re: Columbia DeLuxe Jackpot Setup

Postby badpenny » Tue Jun 18, 2019 11:21 am

The good news is: -
I know where there's a shed load
The bad news is: -
He's never been remotely interested in moving them on … so far!

There only appears to be your good self, Mr. Coppin and me who share any curiosity in them. Well openly that is.


Who is online

Users browsing this forum: No registered users and 1 guest