Bryan’s Clock Hands

General vintage slot machine related topics.
dirk55
Posts: 68
Joined: Thu Apr 21, 2016 6:51 pm

Re: Bryan’s Clock Hands

Post by dirk55 »

Dave
I'm looking at the photo of your index disc, there is a nut and bolt and washer holding the adjusting
Plate closed. It should not be there. Take this out and the pecker blade will go in
User avatar
geordy55
Posts: 229
Joined: Wed Apr 19, 2017 8:33 am

Re: Bryan’s Clock Hands

Post by geordy55 »

Thought this might be the case, thanks for your help.
pennymachines
Posts: 5537
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country

Re: Bryan’s Clock Hands

Post by pennymachines »

geordy55 wrote: Sat Jan 16, 2021 4:09 pm Does anyone know if this is in the resource file...
No it isn't.
User avatar
geordy55
Posts: 229
Joined: Wed Apr 19, 2017 8:33 am

Re: Bryan’s Clock Hands

Post by geordy55 »

dirk55 wrote: Sat Jan 16, 2021 4:44 pm Dave
I'm looking at the photo of your index disc, there is a nut and bolt and washer holding the adjusting
Plate closed. It should not be there. Take this out and the pecker blade will go in
Just removed it and the pecker goes in enough to make a 12 coin payout and I think it moves enough to activate the jackpot, but will know better once it’s back in its case.
pauljt71
Posts: 150
Joined: Wed Nov 06, 2019 8:56 pm
Location: Nottinghamshire

Re: Bryan’s Clock Hands

Post by pauljt71 »

Hi Dave,

Attached a picture of my hand. Also a picture of the adjustable jackpot slot showing the spring clip. The parts in red paint are the adjustable bits.
Attachments
18B8839A-7E4A-4A37-8423-BA782EB84258a.jpg
DCC9C050-910E-4B27-A42F-7C2D799C1930a.jpg
User avatar
geordy55
Posts: 229
Joined: Wed Apr 19, 2017 8:33 am

Re: Bryan’s Clock Hands

Post by geordy55 »

alan57 wrote: Sat Jan 16, 2021 9:13 am Not sure it helps, but this was the one I had. It wasn't the hand that was broken on mine, it was one of the teeth.
What did you do about the broken teeth ?
User avatar
alan57
Posts: 234
Joined: Fri Nov 23, 2012 8:45 pm

Re: Bryan’s Clock Hands

Post by alan57 »

Managed to get replacement
User avatar
geordy55
Posts: 229
Joined: Wed Apr 19, 2017 8:33 am

Re: Bryan’s Clock Hands

Post by geordy55 »

Ok guys, I need some help here.
The mechanism on my clock works well and I'm reassembling the hands as Derek has instructed but to align the hands I need help working out how the jackpot works.

If you look at the photo below, as I understand it the jackpot is activated when Lever C drops off its support and this is done when Lever A moves it.

What I cannot work out is:
Does the cut out E on Lever A need to fall over Pin D ( in which case Lever C moves to the right to activate a jackpot)
or
Does the "point" on lever A need to be raised by the Pin D ( in which case Lever C moves to the left to activate a jackpot)

Your experience and help is greatly appreciated.
Attachments
Jackpot Lever.jpg
dirk55
Posts: 68
Joined: Thu Apr 21, 2016 6:51 pm

Re: Bryan’s Clock Hands

Post by dirk55 »

Hi Dave
I have a photo of the jackpot position that should help you, I don't have a computer, only a tablet and I'm not sure how to upload photos with it. If you PM me your email address I could send it by email and you could upload it to the forum, it may help other members
dirk55
Posts: 68
Joined: Thu Apr 21, 2016 6:51 pm

Re: Bryan’s Clock Hands

Post by dirk55 »

Done it.
Attachments
20200414_153216a.jpg
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests