Fixing large coin escalator problems

Advice and guidance on repair and restoration techniques.
Post Reply
User avatar
treefrog
Posts: 4114
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Fixing large coin escalator problems

Post by treefrog »

Renamed & moved to Tips & Tricks - Site Admin.

Having rebuilt many escalators, I have often had issues with larger coin versions, especially large penny. Common issue being coins overrunning the teeth and bunching. Anyone else had similar issues and what most likely causes have been?

Just finished another Copper Sega....
Attachments
IMG_20181218_22434617a.jpg
User avatar
treefrog
Posts: 4114
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Large coin escalators

Post by treefrog »

Well as with so many questions on this forum, this one never got a response, so though I would answer it myself as it maybe of use to someone.

Bunching of coins on these escalators is common, you see all the time and can often end up with a jam. It seems it is worse on larger coins like the old penny, I guess the weight of the coin does not help. When I have had it on sixpence size coins they are often light enough just to be pushed through.
(Have simulated below picture on a fixed escalator)


ACA815BD-DFD8-46EF-896B-9E8E5DB2527a.jpg


Having stripped, clean, checked etc, I could not work out why this was happening. Things like spring issues or worn teeth came to mind as well as weak compression springs on the slides and grime and dirt. In my case and on another 1D escalator I had, this issue turned out to be something else. Essentially the top toothed slide should be marginally offset to the lower one so that it sits slightly behind, maybe 1mm. This allows the lower slide teeth to grip hold of the coin and the top slide back. If they are the same or the other way around the problem occurs.


85F12F7C-A0E2-456C-93AC-0F27F0E17C2a.jpg


There are few adjustments for this, but I did manage to adjust the slide stop on the end to compensate, which fixed the issue. Maybe of use to someone who wastes their time rebuilding again and again...have fun.


3315D540-E474-4C68-92B5-4251B2A9C89a.jpg


F366044E-02F7-432D-9957-1EF2AFA9195a.jpg

User avatar
moonriver
Posts: 675
Joined: Wed Oct 16, 2013 12:56 am

Re: Large coin escalators

Post by moonriver »

Another example of easy when you know how. I think I had this same issue many years ago and never got to the bottom of it.
User avatar
badpenny
Forum Moderator
Posts: 6642
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands

Re: Large coin escalators

Post by badpenny »

Well sleuthed TF

BP !SHERLOCK!
chris rideout
Posts: 137
Joined: Sat Mar 27, 2010 8:25 am

Re: Fixing large coin escalator problems

Post by chris rideout »

My Sega is a Progressive Star with a Shefras escalator. This has been almost faultless ever since it has been in the machine. The only problems I had were:

(1) Spitting out good coins. Cure: I very slightly bent the hinged part which opens and drops a coin if there is one stuck in the rejector. It was not closing properly.

(2) Rejector sticking after machine was played. You could hear an extra click after the coin slides had moved. This was caused by delayed action of the escalator as it reset to take another coin. Cure: It took about 15 minutes of investigation followed by a 3 second burst of WD 40 to sort it out. :D
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest