Jennings Governor handle jam

Advice and guidance on repair and restoration techniques.
Post Reply
slotty75
Posts: 1
Joined: Sat May 15, 2021 4:42 pm

Jennings Governor handle jam

Post by slotty75 »

I am a newbie to the site but I have had the above machine for about 40 years and bought it as a working example. It has worked fine for many years but has accumulated dust etc in the works. I now find that the handle will not pull right down to spin the reels. The coin feed works OK, plus the reels spin, but it just seems as though the pull arm is jamming up against something. I know this is a rather vague explanation but am hoping it is something simple? Any ideas appreciated or any ideas as to whom I could go to for repair?
I live on the Surrey/Sussex border and can travel.
Thanks and look forward to a response.
User avatar
treefrog
Posts: 4064
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Jennings Governor handle jam

Post by treefrog »

Hi and welcome to site,

There are members down your way who may help, but as a start, are you able to remove the mechanism and see if you are able to operate out of the cabinet? If not, take a few pics. - it might help people diagnose.

!!THUMBSX2!!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests