Aristocrat Fiesta

[willborl]

Thanks a lot Coin-op and PM this is a massive help as I'm sure you know how hard stuff like this is to find.

Cheers

[willborl]

Quick update:
I have now got the reels spinning and it is paying out (most of the time). There was a ton of old grease in every nook and cranny of the mech, which I cleaned as best I could. After carefully putting some parts back (never done this sort of thing before, so as you can imagine I sighed a big sigh of relief when everything fitted back together), I gave the handle a few more pulls and the reels started to spin and are getting smoother as I keep playing it.
Still need to work on paint, lights and converting it to 10p. It is currently on new 1p. Does anyone have a picture of the coin chute? I'm sure the one on mine is a DIY conversion.

Finally I've rubbed the chrome down a bit with some wire wool just to get some of the old dirt off. As you can see from the picture posted by coin-op, the chrome was in a bit of a bad state. Got most of the old gunk off now and it's looking much better.

I'll try to post some pictures when I'm done, but not sure how long the rest will take me.

[malcymal]

These images are great. Just on the subject of making your own award glasses and flashes, what is the best media for printing on to and with what printing type, e.g. high quality laser etc.. I understand it's just a question of sandwiching your image between perspex or glass, but what's the best way for the lighting to work its way through the image? Is there anywhere you can go with your cleaned up image and get it screen printed? if that's what they call it?? malc

[slotalot]

These images are great. Just on the subject of making your own award glasses and flashes,

I can see that you don’t subscribe to the Mechanical Memories Magazine … as I have just done a two part article on the basics of this very subject ,
Take out a subscription now… you don’t know what you're missing 'till you’ve tried it.
Come on, let's keep the magazine alive :thumbs:
As we are on the subject of our Magazine, JC could do with a few more of your articles, photos and stories etc
You must have a tale to tell... so get your fifteen minutes of fame here
https://pennymachines.co.uk/Archive/MMM.shtml

[willborl]

I was just about to say that but slotalot beat me to it.
I'm looking forward to reading the second part of your article and hope to bring new life to some of the artwork on my bandits.

[breadman]

Topic merged - Site Admin.

Hiya all, new to the forum.
I've owned an Aristocrat Fiesta for many years now, which doesn't work properly (reels not aligned, not paying out). I would love to get it restored, and get it back to its original working condition. I've emailed Slot Machine Depot a couple of times, but never received a reply. Can anyone on the forum advise me where I could get in touch with someone who could do the work? Would be helpful if it was in the Hertfordshire area. Thank you.

[coppinpr]

Welcome to the forum.
I'm happy to take a look at it on a no fix no pay but I'm in South London. Any good? Can we see a photo please?

[breadman]

Hi, hope this has uploaded. Yes, South London would be OK.

[coppinpr]

I'll send you a PM with my phone number and work address in South London,
Paul...

[breadman]

Hiya Paul,
Just PM'd you back.