Marvel trade stimulator without coins

[coppinpr]

Do you want me to make you a copy of the disc on peel off sticky vinyl?

[dutchboy]

INCREDIBLE widget, to get an rare item like that so fast. Once again is proven how special this site is!

[widget2k4]

no problem mate.
i had to make it for mine so i kept it just in case ;)

[widget2k4]

i think i printed mine on card and stuck it on with glue, but paul is offering you one on vinyl so may be a better option.

[dutchboy]

Coppinpr that would be great! Maybe you can pm me about the costs? In the time i replied i saw your reply. Maybe after this reply someone is offering to come to the netherlands to put it on the disc

[coppinpr]

Just pm me your address and ill send it,
widg, can you tell me the correct size of the disc?and should it be plain white?

[widget2k4]

now you are pushing your luck

[widget2k4]

paul i am sure it should be set at the correct size if it was to be printed on a4 paper, i done mine white but you may want to tone it down a bit if you prefer.

[coppinpr]

if I print on A4 it comes out at almost 4 inches across,is that correct? looks big and fuzzy
I think the forum system has changed the quality and size, can you email me the file please

[widget2k4]

ok i will send the full image of it, mine is printing at 97mm i am sure that will be right but i dont have the machine now so you may have to get dutchboy to measure his original one.

[pennymachines]

Coppinpr - did you download the full sized image (after clicking on the thumbnail)? It's LARGE and shouldn't print fuzzy.

[coppinpr]

Ok, I've got it now, prints at 97mm and clear, I take it only the outer area is used and the inside is cut away?

[coppinpr]

All done now DB, I'll post tomorrow.

[dutchboy]

Thanks Paul and widget, you are too good!

[dutchboy]

Mail arrived today with the copies. Try to find some time this weekend! Thanks paul and widget

[widget2k4]

[coppinpr]

[dutchboy]

Well nobody came over to put the numbers on the disc for me, so I did it myself
I'm very happy wit it. Here are some pictures of it. It's difficult to get some time to work on the machines, such a shame a day only have 24 hours.
Greetings.

[dutchboy]

Evening all, I did take a look again on my Marvel trade stimulator. Since I get it, it didn't pay out on the right combinations. In general you can say it pays out when it should not and when it have to pay out it won't. I'm afraid the former owner took the reels and payout discs apart and didn't put it back properly. Will there be an easy way to find out the good position of the payout fingers and discs? There are on the first and third reel two little dots (see picture of third reel). Is it possible this has something to do with the positioning?

[dutchboy]

No one any idea?