Super Challenger restoration

Somebody knows... Maybe you?
geofflove
Posts: 249
Joined: Sun May 03, 2020 2:01 pm

Re: Super Challenger restoration

Post by geofflove »

treefrog wrote: Thu Apr 15, 2021 12:56 pm I have seen a few and owned at least one of these where the deflection wheel had been removed and replaced with a red covering. I have never found the control on these to be particularly useful anyway......
You can just about get the coin to go to the left or right of the disk if you are lucky. That’s about it.
User avatar
badpenny
Forum Moderator
Posts: 6642
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands

Re: Super Challenger restoration

Post by badpenny »

Use two or three in parallel.
Or a very long one doubled up.
geofflove
Posts: 249
Joined: Sun May 03, 2020 2:01 pm

Re: Super Challenger restoration

Post by geofflove »

Yep, that would do it!
User avatar
special when lit
Posts: 344
Joined: Fri Dec 17, 2004 4:46 pm
Location: Derby

Re: Super Challenger restoration

Post by special when lit »

Pinball rubbers would be about the right diameter, and you can get them in lots of different sizes.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests