How many spins?
- margamatix
- Posts: 112
- Joined: Sun Jan 02, 2005 10:22 pm
- Reaction score: 0
- Location: Margate
How many spins?
On a 1950-ish Ruffler and Walker allwin, how many times ought the ball to travel around the spirals before dropping into a cup or the lose hole?
Mine has only ever done two or three loops although the spring seems strong. Recently, in Great Yarmouth I played a lot of allwins and all were sending the ball around the spirals six times or so.
Over the "lose" hole, there is a heavy brass flag, and it seems to be this which slows the ball down so much. Excuse the poor photo, I should have taken one by daylight rather than by using flash.
Some allwins seem to have this flag but the majority don't. Is this original or a showman's modification?
Any thoughts welcome.
Mine has only ever done two or three loops although the spring seems strong. Recently, in Great Yarmouth I played a lot of allwins and all were sending the ball around the spirals six times or so.
Over the "lose" hole, there is a heavy brass flag, and it seems to be this which slows the ball down so much. Excuse the poor photo, I should have taken one by daylight rather than by using flash.
Some allwins seem to have this flag but the majority don't. Is this original or a showman's modification?
Any thoughts welcome.
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Newton's third law of thingy refers
Assuming you haven't got one of those massive gargantuan machines that need a steam powered hammer to fire the ball (every 24 cup size machine I've seen appears laborious), then check the following: -
* Is the spring the right one?
*Does the flag over the lose 'ole have restricted swing due to a couple nails having been placed either side of it?
* At rest, does the tip of the hammer sit inside the cowling?
The first question is obvious, the second one seriously slows the ball down with the intention of directing it towards the lose hole instead of allowing it to energetically rise to the occassion. The third one happens because the tip of the hammer sacrifices itself instead of damaging the ball. As the tip shortens, it retreats inside the cowling and only strikes the ball as it is already de-accelerating after having first come into contact with the rubber bung that stops it from smashing into the frame. If so, adjust the rubber bung.
zenataomm
* Is the spring the right one?
*Does the flag over the lose 'ole have restricted swing due to a couple nails having been placed either side of it?
* At rest, does the tip of the hammer sit inside the cowling?
The first question is obvious, the second one seriously slows the ball down with the intention of directing it towards the lose hole instead of allowing it to energetically rise to the occassion. The third one happens because the tip of the hammer sacrifices itself instead of damaging the ball. As the tip shortens, it retreats inside the cowling and only strikes the ball as it is already de-accelerating after having first come into contact with the rubber bung that stops it from smashing into the frame. If so, adjust the rubber bung.
zenataomm
Who is online
Users browsing this forum: Bing [Bot] and 48 guests