Somebody knows... Maybe you?
User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Double Six one armed bandit

Postby mei-mei » Thu Dec 08, 2016 8:00 pm

Hi there I just love to find out the history of these machines, so thank you. I would have a stab at what you are suggesting if I knew which part of the machine you are referring to. Remember I'm the 'hit it with a hammer' person! :smash:

User avatar
coppinpr
Posts: 4086
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Double Six one armed bandit

Postby coppinpr » Thu Dec 08, 2016 8:07 pm

its not going to easy if your unsure of the basic workings of the machine, open the machine and run the machine,when you get a winner note which parts move and pay, the slides are the pieces that hold the coins ready to pay and will be just above the coin payout bowl.

You WILL find your machine at this excellent site http://www.automatix-club.de/
look through the alphabetical lists bottom left of the welcome page. BUT I dont think you will find it as "double Six" only under what ever its german name was

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Double Six one armed bandit

Postby mei-mei » Thu Dec 08, 2016 8:09 pm

Ah thanks again, is it the flat plates that are stacked on top of each other with a load of springs on the top?

User avatar
coppinpr
Posts: 4086
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Double Six one armed bandit

Postby coppinpr » Thu Dec 08, 2016 8:13 pm

they look like this (note the broken one)
beromat slide.JPG
beromat slide.JPG (84.07 KiB) Viewed 1089 times

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Double Six one armed bandit

Postby mei-mei » Thu Dec 08, 2016 8:15 pm

Yeah thats them. Once again thank you for your continued assistance. I will go and give it a whirl. Mei-mei

User avatar
badpenny
Forum Moderator
Posts: 6384
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Double Six one armed bandit

Postby badpenny » Thu Dec 08, 2016 8:47 pm

mei-mei ......

What was the outcome of my post yesterday at 6.49pm?
I was certain that the answer to your problem lay there.

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Double Six one armed bandit

Postby mei-mei » Fri Dec 09, 2016 1:16 pm

Hi, checked the plate thingys and all seem to be ok. Looked again at the spring I replaced that opperates the arm beneath the centre reel and it was way too tight. Shortened the spring a bit and Voila! She's paying out again. Woo hoo!!! !!RAYOF!! Thanks for your help guys. Is there like a slot machine convention anywhere, it would be really nice to meet you in person and buy you a drink!

User avatar
coppinpr
Posts: 4086
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Double Six one armed bandit

Postby coppinpr » Fri Dec 09, 2016 1:55 pm

you just missed the coventry auction two weeks ago. :#:

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Double Six one armed bandit

Postby mei-mei » Fri Dec 09, 2016 2:21 pm

Is an auction the same as a convertion?

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Double Six one armed bandit

Postby mei-mei » Fri Dec 09, 2016 2:28 pm

What an interesting site ( http://www.automatix-club.de/). Thanks for the heads up !THUMBS!


Who is online

Users browsing this forum: No registered users and 21 guests