Page 1 of 1

Sega Windsor Buccaneer jackpot feed tube

Posted: Wed Sep 05, 2018 6:20 pm
by pennywise
Hi I've got a Sega Windsor "The Buccaneer" with a jackpot window but there isn't a feed tube to fill the jackpot, does anyone know if it should have one or where to even start looking for one or is it a manual fill. !PUZZLED! Many thanks

Re: ????? Jackpot feed tube ?????

Posted: Wed Sep 05, 2018 6:57 pm
by radiochrissie
It’s not manual fill, someone has removed the feed tube. Sorry can’t help with the right part but here’s what it should look like :cool: I made one out of plastic pipe which worked fine until I sourced the right part.

Re: ????? Jackpot feed tube ?????

Posted: Wed Sep 05, 2018 7:16 pm
by badpenny
Yes it should, as I don't have a machine like that I can't show you. Perhaps somebody who has could post a piccy.

Coins overflow from the top of the pay out tube to the JP and then when that's full they topple through the spring loaded trap in the tap and fall into the cash box below.


Personally I'd be tempted to open up a tin can and fashion one myself.

BP :cool:

Re: ????? Jackpot feed tube ?????

Posted: Wed Sep 05, 2018 7:20 pm
by pennywise
That's great thanks time to go into search mode then. !THUMBS! I do have another with the solenoids and micro- switches present so could you possibly take a side pic of your to see if the switches are the same because I want to get it off FREE play.

Re: ????? Jackpot feed tube ?????

Posted: Wed Sep 05, 2018 7:40 pm
by treefrog
Stick an advert on, I have dozens of jackpot parts, including the chutes

Re: ????? Jackpot feed tube ?????

Posted: Wed Sep 05, 2018 8:58 pm
by badpenny
Ditto ………

Stick a Wanted advert here https://pennymachines.co.uk/market/advertise/
And I'll draw the attention of it to someone I think may have one.

BP

Re: ????? Jackpot feed tube ?????

Posted: Thu Sep 06, 2018 7:36 am
by widget2k4
Looks like he needs a complete new payout tube as the bolt hole has been smashed off, or some fabrication to make a new one?

Re: ????? Jackpot feed tube ?????

Posted: Thu Sep 06, 2018 9:27 am
by badpenny
He's missing two parts, the coin tube that connects to the JP and the coin deflector that sits at the top of the tube.

Re: ????? Jackpot feed tube ?????

Posted: Thu Sep 06, 2018 9:35 am
by treefrog
You are right Keith, the top tube casting has damage, so three bits are needed and if including the plastic coin tube 4 :cool: Someone must of been super strength to undo those little screws. :o

Re: ????? Jackpot feed tube ?????

Posted: Thu Sep 06, 2018 3:30 pm
by chris rideout
widget2k4 wrote: Thu Sep 06, 2018 7:36 am Looks like he needs a complete new payout tube as the bolt hole has been smashed off, or some fabrication to make a new one?
Bodger's delight! You're the one who picks up the pieces (depends how many pieces you need) after the care and attention has been lavished from someone who works in a butcher's shop.

Incidently, when all the parts have been obtained and fitted, be careful not to have the back flap to the jackpot too tight. There should be a long thin spring that hangs from a hook on the flap and the other end is put on a small teardrop shaped plate which can be set in position by tightening up a screw. If the flap is too tight (owing to spring tension) the coins will pile up and the reserve jackpot will jam. The older mechanical machines would do this as well.

Many years ago, I had my Progressive Star playing up like that. Not much in the coin box and a tube full of old size 5p coins. I wondered where the hell the coins were going. When I inspected the jackpot, there they were, all heaped up like an overloaded wheelbarrow. If I had won a jackpot, the reserve would have probably delivered next to nothing.

That machine is now 55 years old and I still have it.

Re: ????? Jackpot feed tube ?????

Posted: Thu Sep 06, 2018 4:43 pm
by pennywise
Thanks Chris when I was playing the other day I actually got 3 bars jackpot the jackpot mech was lovely and smooth in opening up so because I know that works that is why I'm now wanting to put the feed tube back on. |/XX\|

Re: ????? Jackpot feed tube ?????

Posted: Thu Sep 06, 2018 7:57 pm
by widget2k4
But if you don’t put the feed tube on when the payout tube gets full the coins are going to go everywhere and probably jam everything up
Sorry read it wrong thought u said you didn’t want to put it back on haha