Somebody knows... Maybe you?
liamo81
Posts: 9
Joined: Sun Jul 15, 2018 5:18 pm

Sega Windsor coin lock-out

Postby liamo81 » Wed Sep 19, 2018 7:09 pm

Evening.

So, my next question as I try and save this Windsor from the scrapheap if anyone can help...

I understand there is a pin that should come in and out below the coin mech to prevent more than one coin dropping between plays, but don't have one on my machine. Should all Windsors have this?

I assume the part pictured is an electro-magnet that operates the missing part?

Is anyone able to post a photo of this area of their complete machine for comparison please?

Assuming I am missing a part or two, does anyone have any suggestions where to start hunting for the bits?

Thanks in advance.
20180919_140913a.jpg
20180919_140936a.jpg

User avatar
treefrog
Posts: 2946
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Sega Windsor coin lock-out

Postby treefrog » Wed Sep 19, 2018 9:49 pm

Can’t remember, there is a parts diagram in the resources.....if no one else responds I can check next time I am near one.

User avatar
pennywise
Posts: 45
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Sega Windsor coin lock-out

Postby pennywise » Thu Sep 20, 2018 5:28 pm

Hi Liam - hope the pics help pal. Electromagnet is missing the flap pictured BUT I took it off because you just get a vibration from flapping on the magnet when plugged in and it makes a massive difference in noise. Other than that, works fine with coins.
20180920_182010a.jpg
20180920_181923a.jpg
20180920_181700a.jpg
20180920_181528a.jpg

liamo81
Posts: 9
Joined: Sun Jul 15, 2018 5:18 pm

Re: Sega Windsor coin lock-out

Postby liamo81 » Fri Sep 21, 2018 7:25 am

Thanks mate, exactly what I was after, cheers.

Does anyone have that piece knocking about in their spares that they would consider parting with?

liamo81
Posts: 9
Joined: Sun Jul 15, 2018 5:18 pm

Re: Sega Windsor coin lock-out

Postby liamo81 » Thu Sep 27, 2018 8:48 am

Anyone?

Pennywise, do you think you could measure that flap and pin all round please? I'll try and cut something to size if I can't locate one.

What's on the other side of that rivet?

Thanks.

User avatar
pennywise
Posts: 45
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Sega Windsor coin lock-out

Postby pennywise » Thu Sep 27, 2018 3:23 pm

No probs pal, hope it helps. Nothing on the other side, just a small rivet to serve what purpose i don't know. There is also a tiny spring which holds it in place in the machine. I can't let you have this because I have another machine that I need to find all the micro switches to fit back onto the mech. Got them all in the case but on free play at the moment. Be nice to see a pic of the front of yours to see which one you have if you can pal. Need owt else pal just ask - no expert but deffo easier if you have a comparison. !!THUMBSX2!!
20180927_160735a.jpg

liamo81
Posts: 9
Joined: Sun Jul 15, 2018 5:18 pm

Re: Sega Windsor coin lock-out

Postby liamo81 » Mon Oct 01, 2018 9:05 pm

Thanks for taking the time to do that mate, great help.

It's in pieces at the moment but will take some pictures in next day or two.


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot] and 4 guests