FORUM

You could edit the letter 'P' to make a 'D', the opposite to what the 'decimalizers' did in '71.

Oh I see, yes I could paint out the bottom part of the P and be left with a small capital D.

alan57 wrote: ↑Mon Nov 19, 2018 4:26 pm I made a few Wonders coin slots a few years ago out of Prince August metal, I think I may still some somewhere.

Hi Alan57, if you do find any would you be prepared to sell one? It will go to a good home.

Hi Ralph
Found this one, if it's of any use.
Alan

I've made the odd part out of "Prince August metal" and it's easy to work with.
Due to its softness I've found that coating it afterwards, especially surfaces that will come into contact with other metal helps it not wear.

If you Google casting resin and search for those that claim to have a diamond hard finish you'll find two pack products. Give the inside of the slot where the coin will touch a generous coating. It might even be worth oversizing the hole and building it back up with the resin. It dries fairly quickly but doesn't truly go off for a day or so and if you're impatient you'll end up with a sticky surface.


BP

alan57 wrote: ↑Tue Nov 20, 2018 2:15 pm Hi Ralph
Found this one, if it's of any use.
Alan

Thanks very much Alan , wow that was quick , was hoping someone had one cheers , that looks great.
I will send you a private message alan
Thanks again to BP also about tips about the resins too

The only Wonders coin slot of the same style I could find online , was in the UK , brass and not plated , that had been sold.

Made the small ratchet part needed out of 3 Pinball target lifters, I used 3 to build up the thickness it needed. Only a bit of grinding and one small hold drilled to take the spring, it worked after 1 minor filing.



New cards and decals fitted. Thanks to a collector friend Adrian and his wifey on doing a great job with them.



Game mostly back together again.



The Cabinet was painted black by the previous owner. He did a nice job with it, so I will be leave it as it is for now.
What does everyone else think about this? Painted or back to natural ply?



Just a few more cabinet repairs/ re-gluing and the coin chute to suit old pennies and the coin housing.

Thanks to Alan57 I have the correct coin slot on the way too.
Will post more pics as it progresses.

Coin parts are made, I put together the coin tube, which I will need to shorten and or modify slightly if the coins won't slip off into the cash box properly. I will see when the game is complete and operating.



My friend made up the Teflon housing and put together the 4 fancy spring loaded brass adjustment screws.
He always over builds everything, built to last.

It certainly will last and if it does the job

Hit n Run back together working. Pays out up to 8 pennies if you load all 3 bases and make a home run.
This game was missing the cash box and 1 or 2 coin chute parts.
I made one coin chute plate to guide coins to the pay out tray. I made that out of thin stainless, after making up a template out of card.



I used my new sheet metal bender, came out well. I'm not sure how close it is to the factory fitted one though.





Screwed on the new repro 1D coin entrance plate, cheers Alan57.



Game still needs a few minor satin black paint touch ups on the cab.
One last part I need to sort out is the cashbox, its size and chute set up, which feeds the cashbox.
Cabinet has two slots cut into the ply inside, one I think is for a lock to latch into.



The other is quite long and runs at an angle... I need a plan or photo of how it should be. I'm thinking the second slot is to hold the cashbox somehow on this larger Wonders plywood cabinet type?



Cheers in advance.

Here's a cashbox from a Wonders Bucket & Ball. I don't know if the dimensions are identical, but the design should be the same. Please forgive the mixed imperial and metric units.
The bottom and back pieces are of 6mm ply, the rest is 10mm.

Thank you Admin, that is brilliant.
Didn't think the cashbox was that big, but it makes more sense now with the chamfered edge and the various slots inside the cab. Will knock one up in ply, and before gluing I will dry fit into the game, to make sure the door still closes and that it sends the coins into the cash box correctly.
I will make one up and report back with a few pics. I happen to have the plywood already,
Cheers.

How bizarre, I just broke up an old Wonders cabinet the other day, note the big hammer, and one of those cash boxes is with it. Shame you're so far away......

Thanks Treefrog , wish I was closer too ,
but your pic is good of the box , it's slightly different to the 'Bucket and Ball' cashbox that admin kindly sent pics through of , Yours has the top of the box covered over for about 2/3 of it's length with ply . I will use all the pics you guys have sent to make one up for my game .
Cheers

New cash box made. Thanks for the plans guys. I used some scrap ply I had and, after many refits and adjustments, got it to fit perfect.
Just need a lock fitted now and small cutout maybe, like the one in treefrog's cashbox. Must be for fingerholes, no laughing.
I didn't make the very top section, (top lid) like pictured in treefrog's one either, as I don't think it's needed, unless you were operating these as a money maker and needed to make it harder to get to the coins.