Page 1 of 7
Aristocrat Quartette
Posted: Sat Mar 07, 2009 7:39 am
by wb
Hello,
Does anyone know of or have a wiring diagram for an aristocrat 4 reel Quartette one arm bandit with a hopper payout please?
Ivan
Re: Aristocrat Quartette
Posted: Sat Mar 07, 2009 8:05 am
by operator bell
I have manuals for the Esprit range, dunno if this is one of them. I could tell if I could see a picture.
Re: Aristocrat Quartette
Posted: Sat Mar 07, 2009 10:04 am
by wb
Hi There,
Thanks for the quick reply, how's the weather out there? It's wet here!
Attached is a picture, any information you could send me would be greatly appreciated,
Ivan
Re: Aristocrat Quartette
Posted: Sat Mar 07, 2009 1:02 pm
by treefrog
Seen this on the US flea site
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0289759258
It appears to cover hopper based systems, whether it includes a wiring diagram who knows, but does talk about the counter, hopper, motor, brake etc (also a picuture of 4 reeler on the front) and only $10 (if they will ship to the UK).
I also have a hopper based 4 reeler Quartette "Hoots Mon", so might try and get one myself.
Re: Aristocrat Quartette
Posted: Sat Mar 07, 2009 4:23 pm
by wb
Many thanks,
Do you have this manual on PDF at all?
The Hoots Mon is exactly the same as the Quartette, apart from the glasses. Awards are the same and reel bands are nearly identical.
Re: Aristocrat Quartette
Posted: Tue Mar 24, 2009 5:54 am
by wb
Hi,
I contacted the seller on ebay regarding the manual, but it appears they will not ship to UK.
Does anyone have a wiring diagram for this machine please? or maybe even a service manual in PDF format?
Re: Aristocrat Quartette
Posted: Tue Mar 24, 2009 8:14 am
by operator bell
I'm in the US, so I bought the manual. I'll PDF it when it arrives.
Re: Aristocrat Quartette
Posted: Tue Mar 24, 2009 7:36 pm
by wb
That would be brilliant, thank you.
Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 5:06 pm
by wb
Topic merged - Site Admin.
Hi All,
I've just purchased one of these; the machine has potential but the reel bands are in a very sorry state. Does anyone have the reel symbols in a pdf, jpeg etc so i can recreate them in paint and get them printed please? any help would be appreciated.
thanks
Re: Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 5:06 pm
by treefrog
I believe the reels on these are the plastic type and the bands are glued to them, so unless someone happens to have a spare set, your best best would be to warm up the reels and try and peel them off carefully. (I did this on a three reel Kingsway) You can then copy as much of the reels that are good and replicate the bad parts from the good ones.
Nice buy for the money, I have a Hoots Mon four reeler, not sure how you would would change it back to the 500 coin payout though.
Re: Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 5:07 pm
by wb
Hi treefrog
Thank you for your kind reply. the chrome is really good and so it should be as the whole machine is caked in oil for some bizarre reason which has preserved it over the years!!!!!
I don't suppose you still have a copy of the reel tapes for your three reeler that you can email please? i can always resize and see what they look like. I liked this machine a lot and have one in mint condition with a hell of a story behind it, and saw this on ebay and couldn't resist another!!!!
Re: Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 5:08 pm
by treefrog
I did not scan them, but took some from a spare set of reels I had. In any case they are of the fruit type. Most of the 4 reelers seem to have the same card based reel theme, which is unique to them. The biggest pain with these clear plastic reels is that they are seriously brittle..... so be gentle with them.
Re: Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 5:09 pm
by wb
Many thanks for the tips.
Ivan.
Re: Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 5:38 pm
by wb
Hi again all,
I posted a question about reel bands for the Aristocrat Kingsway Quartette last night, but the post seems to have gone AWOL.
(Posts now restored above - Site Admin).
After buying this dog off ebay the other night (woof!), I am most keen to get it brand new as soon as possible. The chrome is good but caked in oil for some reason, probably with intention to preserve it! The cabinet top needs a repaint (not a problem) and the wooden sides (I know, I thought this was odd for an Aristocrat Club) are good. However, the Reel tapes are well knackered. Does anyone know any of the following:
A) Where I can get new ones?
B) How to get the old ones off to scan them, someone suggested heat, but fear this might damage them as they are fragile and flaky like me already.
C) Who may have scanned these symbols already and how I can get them emailed to me?
The symbols are the narrow 4 reel Jack, queen, king, ace, ten, nine
Any help at all is appreciated. Thank you all, Ivan
Re: Aristocrat Kingsway Quartette
Posted: Tue Jul 12, 2011 7:12 pm
by raj
Ivan, if you can hang on a bit, I have a 3 reeler I need to scan the cards from ( just shrink to fit in Paint when you edit them into your reel strip). I'll have a look this weekend. I wrote down the spacings somewhere which will help you build a 20 stop strip. This will mean you don't have to risk damaging your originals
I was the underbidder on this one, should have gone a bit further....boo hah
Re: Aristocrat Kingsway Quartette
Posted: Wed Jul 13, 2011 6:20 am
by wb
Many thanks for the offer. Sorry I gizumpt you (I think that's how you spell it!). I came in last 10 seconds with a £200 bid as it looked decent. I would have been quite cross if I had bought it for this much!!!!!!!
I would appreciate a copy of the reels, thank you very much. Will send you a pm.
Regards, Ivan.
Re: Aristocrat Kingsway Quartette
Posted: Thu Jul 14, 2011 7:44 pm
by wb
A Stanley blade got them off (other blades are available)................................................
................................And now for Paint Shop Pro...............mum's good at that, even at 86!
Hopper bother
Posted: Sun Jun 16, 2013 9:17 am
by hutto
Topic merged - Site Admin.
Hi all,
Need some help please. Just got an Aristo Hoots Mon
but the hopper refuses to play ball
Does anyone have knowledge of these dastardly things?
I have checked the fuses and looked to see if there are any loose wires. They all seem intact
Any ideas chaps?
Re: hopper bother
Posted: Sun Jun 16, 2013 10:23 am
by badpenny
I'd suggest it can't be much.
Although I've not had an electric payout bandit, I have on more than one occasion picked up a perfectly working machine which by the time it had rattled around in my car boot had stopped working.
It's probably a dry connection on either one of the connector plugs or switches.
Is it refusing all payouts? When you picked it up were there any payouts that faltered? Actually did you pick it up or buy it unseen?
A simple meter will tell you how far the bighty stuff is getting and confirm the continuity of the circuits. Apart from fuses look for solenoids that are stuck open.
BP
Re: hopper bother
Posted: Sun Jun 16, 2013 11:10 am
by treefrog
You have not described what it is doing if anything at all. As BP says, most likely cause is a loose connection and there is no easy answer to this other than working your way through the cable looms, either tweeting to see if it breaths life or using a meter. As also asked, did you see it work? Always a good idea with electro-mechanical machines. Pictures would be good.....