Somebody knows... Maybe you?
vince55
Posts: 21
Joined: Thu Jan 04, 2018 11:09 am

Fun at the Fair Nostalgic Machines restoration

Postby vince55 » Fri Apr 12, 2019 1:31 pm

Can anyone help me? For years I have wanted an Allwin machine, but could not afford one. But recently I was offered at a bargain price a Nostalgic. It was in poor condition, faded back flash and rusted, so I have tried to restore it to how I thought a '50s type of machine should look.

IMG_5295a.jpg
IMG_5626a.jpg
There is a problem with it that I don't know how to fix. When the ball goes through the LOSE hole, it comes out again by the hammer hole.

IMG_5641a.jpg
IMG_5646a.jpg
I did find in the bottom coin tray a part which I assume is the missing link but I don't know where it goes.

IMG_5654a.jpg
I would be very grateful for any help you can give me.

User avatar
gameswat
Posts: 1653
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Fun at the fair Nostalgic Machines restoration

Postby gameswat » Fri Apr 12, 2019 2:10 pm

In the two back photos you can clearly see the wire that holds the ball is in place is there, and it seems to be free moving as shown in the open and closed positions. !PUZZLED! All I can suggest is that the coin trip lever is not returning after a coin hits it. It should just lift that wire long enough to release the ball and drop it back. If you can't make sense of it, then try a piece of clear plastic instead of the tin over that ball release part and watch what happens when you lose a ball, and then drop a coin.

User avatar
slotalot
Posts: 1813
Joined: Mon Apr 21, 2008 1:53 pm
Location: Halifax West Yorkshire
Contact:

Re: Fun at the fair Nostalgic Machines restoration

Postby slotalot » Fri Apr 12, 2019 2:52 pm

Not sure the nail should be there??? Won't be helping matters... !PUZZLED!
IMG_5646a.jpg
IMG_5646a.jpg (45.68 KiB) Viewed 1299 times

User avatar
pennymachines
Site Admin
Posts: 4565
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Fun at the fair Nostalgic Machines restoration

Postby pennymachines » Fri Apr 12, 2019 3:53 pm

The extra bit you found at the bottom can be inserted into the ball channel slot so that, after a win, the ball bypasses the capture wire and is returned for a free play.
deflector.jpg

User avatar
gameswat
Posts: 1653
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Fun at the fair Nostalgic Machines restoration

Postby gameswat » Fri Apr 12, 2019 4:29 pm

Looks a gazillion times better without that dark varnish and a much finer choice of backflash artwork, nicely done. I think it looks much better without that marquee on top too.

User avatar
pennymachines
Site Admin
Posts: 4565
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Fun at the fair Nostalgic Machines restoration

Postby pennymachines » Fri Apr 12, 2019 5:19 pm

My thoughts exactly.

vince55
Posts: 21
Joined: Thu Jan 04, 2018 11:09 am

Re: Fun at the fair Nostalgic Machines restoration

Postby vince55 » Sat Apr 13, 2019 5:47 am

Thank you very much for all your advice, it works nicely now. I was afraid I would get a roasting for changing the original look but I'm very pleased you agree with me over the improved look.


Who is online

Users browsing this forum: No registered users and 3 guests