New Polyphon Supply shocker identified
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Harper’s Volta? Electric shock
OK - so using our Archives/Patent search I've found the New Polyphon Supply Company's 1902 patent GB190207860
This is clearly our machine. Helpfully, it even shows a nice little shaped pediment on top, not unlike the EH example. New Polyphon were located at 2 Newman Street, London, but more significantly, co-patentee Karl Schmidt (Mechanic) had an address at 86 Fairbridge Road, Upper Holloway, London, N., less than one and a half miles from Harper's.
Another shocker on page 150 of Automatic Pleasures is the not entirely dissimilar circa 1905 Electron, also by New Polyphon Supply.
This is clearly our machine. Helpfully, it even shows a nice little shaped pediment on top, not unlike the EH example. New Polyphon were located at 2 Newman Street, London, but more significantly, co-patentee Karl Schmidt (Mechanic) had an address at 86 Fairbridge Road, Upper Holloway, London, N., less than one and a half miles from Harper's.
Another shocker on page 150 of Automatic Pleasures is the not entirely dissimilar circa 1905 Electron, also by New Polyphon Supply.
Re: New Polyphon Supply shocker identified
This is all wonderful, but not helping me much....... I was the under bidder and I wish I'd bid a little bit higher.
- john t peterson
- Posts: 1336
- Joined: Wed Dec 01, 2004 5:40 pm
- Reaction score: 7
- Location: USA
Re: New Polyphon Supply shocker identified
I am pleased by not shocked by this erudite investigation. Well done, Chaps.
J Peterson
in America
J Peterson
in America
Re: New Polyphon Supply shocker identified
Excuse my Investigative behaviour ....
But is the one posted by Paul and the one posted by PM from EH action exactly the same machine but with a bit of timber added on top?
It seems to me that the wood grains and markings are exactly the same.
Evenin' All,
Detective Inspector Dicky Wink
But is the one posted by Paul and the one posted by PM from EH action exactly the same machine but with a bit of timber added on top?
It seems to me that the wood grains and markings are exactly the same.
Evenin' All,
Detective Inspector Dicky Wink
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: New Polyphon Supply shocker identified
Well spotted. Was the pediment your handiwork, Paul? It certainly looks the part.
Re: New Polyphon Supply shocker identified
Hi all.
The coin entry I made, also the cashbox door. The top pediment was with the machine. The pictures were taken as I was assembling and waxing the cabinet. The machine was bought in Shropshire a few years ago in original condition. That's all I know of it.
The coin entry I made, also the cashbox door. The top pediment was with the machine. The pictures were taken as I was assembling and waxing the cabinet. The machine was bought in Shropshire a few years ago in original condition. That's all I know of it.
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: New Polyphon Supply shocker identified
Ah, thanks. Mystery solved. I see from the light mark, and screw holes on the wood around it, that the coin slot was originally the same shape as the ebay example.
-
- Posts: 27
- Joined: Sat Jun 11, 2016 4:25 pm
- Reaction score: 0
- Location: Halle, Germany
- Contact:
Re: Harper’s Volta? Electric shock
Hi.pennymachines wrote: ↑Tue Oct 08, 2019 5:42 pm OK Gameswat, so it seems more likely it's British.
Unfortunately Nic doesn't state where his image of the Electric Volta was from, so we can only guess that the original source included the D. Harper & Co. attribution. Paul Braithwaite cites this page of Nic's book as his source. I assume Paul had some reason to believe Harper was probably only a distributor as Nic did not say so.
This machine was produced by "E.G.Lochmann & Co., Leipzig" around 1899-1902 as "Volta". In the year 1903 Lochmann's company went bankrupt and was re-founded as „Jentzsch & Meerz". They continued to build Volta-shockers (Volta 2 - 1904, Volta 3 - 1927, ...):
Both companies, Lochmann and Jentzsch & Meerz, produced a lot of machines for export.
Here is a German-version of the NPSC-shocker also labeled as "Volta"
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Who is online
Users browsing this forum: Bing [Bot], Semrush [Bot] and 32 guests