Somebody knows... Maybe you?
tomo55
Posts: 5
Joined: Thu Mar 21, 2019 2:09 pm

Jennings Governor lighting

Postby tomo55 » Mon Feb 17, 2020 10:04 am

Hi,
Does anyone have any suggestions as to what lighting I should put in my Jennings Indian head machine? I bought it without any lighting in. Only the metal bulb holders are in the top.

User avatar
treefrog
Posts: 3510
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: jennings govenor

Postby treefrog » Mon Feb 17, 2020 2:08 pm

I haven’t looked in one for a long time, but the lighting is usually multi fluorescent tubes attached inside lighting up top, award plate and reels. Below maybe what the arrangement should look like.

If missing transformer etc, you can of course buy bits to replace or choose low voltage strips that a lot of people also seem to use. This is of course a personal choice......personally I love the hum and buzz of old lights.

Installing low voltage lighting
32370CEE-A268-4B7A-981A-49DB4197A5CD.jpeg
32370CEE-A268-4B7A-981A-49DB4197A5CD.jpeg (45.05 KiB) Viewed 728 times

tomo55
Posts: 5
Joined: Thu Mar 21, 2019 2:09 pm

Re: Jennings Governor lighting

Postby tomo55 » Fri Mar 06, 2020 9:54 am

Thank you for the reply.i don't suppose you know where the parts should be positioned.thanks.bri

User avatar
coppinpr
Posts: 3950
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Jennings Governor lighting

Postby coppinpr » Fri Mar 06, 2020 11:08 am

Original sets are around (I have one set to sell myself) and new replacement ballasts of several types can be found on ebay. If safety is a prime consideration (kids around etc.), you might like to consider the new solid state style control that replaces the old style ballast/choke. These are very cheap and work perfectly, see below.
https://www.ebay.co.uk/itm/Headlight-T4 ... 0005.m1851

tomo55
Posts: 5
Joined: Thu Mar 21, 2019 2:09 pm

Re: Jennings Governor lighting

Postby tomo55 » Sat Mar 28, 2020 12:05 pm

Thank you for the response. Does anyone have a photo of where the old lights and fittings, starter etc. should be fitted?
Thanks
bri


Who is online

Users browsing this forum: MSN [Bot] and 1 guest