Somebody knows... Maybe you?
User avatar
pennywise
Posts: 114
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

German wall hanger

Postby pennywise » Mon Apr 13, 2020 8:18 am

Hi guys,
I have this wall hanger that did work but the resistors have got hot and blown. There is no markings on the resistor and when i put a multimetre on it there is nothing at all showing. Hopeing that someone has the same machine that could give me a reading to find out the size of what i need. Put a couple of pics up to show which one has gone and hopefully wanting to replace to see if it works again.
The white rectangle one has also gone which is below my finger but that has the part number of KKA5 220ohms but cannot find one like it either. Any info on these 2 would be fantastic or someone with the same machine to see if any numbers on their resistors.
Heres hopeing, thanks guys any info at all would be great.
20200410_131723a.jpg
20200410_132158a.jpg
20200410_131738a.jpg

User avatar
radiochrissie
Posts: 185
Joined: Sun Oct 10, 2010 7:03 pm
Location: The Iron Men
Contact:

Re: German wall hanger

Postby radiochrissie » Mon Apr 13, 2020 8:49 am

That resistor you're pointing at should be 1k and looks to be 5w. I bet those diodes are goosed as well.
Pic is from previous ebay item. You should be able to get all resistors from RS Components.
Good luck!
1520DCBD-7802-40D2-AB51-616660F00A38a.jpg

User avatar
pennywise
Posts: 114
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: German wall hanger

Postby pennywise » Mon Apr 13, 2020 9:48 am

Thank you radiochrissie, I've metered the diodes and all seem to be OK but will replace if gone. Need to replace the two that have gone first, so now at least I've got a place to start. Thanks again - will let you know if I get it going, or just cannon fodder. 😂


Who is online

Users browsing this forum: No registered users and 2 guests