Somebody knows... Maybe you?
consul1961
Posts: 6
Joined: Mon Jun 17, 2019 7:45 pm
Location: Suffolk

Aristocrat Olympic pay sides don't push forward

Postby consul1961 » Sat May 23, 2020 6:52 pm

I have a Aristocrat Olympic that when I pull the handle only the top slide moves forward, the other 4 do not move forward and therefore the payout has stopped working. The pusher only seems to catch the top slide and doesn't connect with any of the bottom slides..... any ideas?

User avatar
gameswat
Posts: 1824
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Aristocrat Olympic pay sides don't push forward

Postby gameswat » Sat May 23, 2020 8:21 pm

Most likely jammed coins, empty them out and usually you'll find some fell in vertically.

User avatar
badpenny
Forum Moderator
Posts: 6209
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Aristocrat Olympic pay sides don't push forward

Postby badpenny » Sat May 23, 2020 9:01 pm

:didact: ..... What he said. Then when you reassemble, don't forget the overflow trip at the top of the tube! We've all done it.

BP

consul1961
Posts: 6
Joined: Mon Jun 17, 2019 7:45 pm
Location: Suffolk

Re: Aristocrat Olympic pay sides don't push forward

Postby consul1961 » Sun May 24, 2020 11:56 am

It will not push forward with coins or no coins. The pusher only catches the top slide and no other. Is there a piece missing?

User avatar
treefrog
Posts: 3598
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Aristocrat Olympic pay sides don't push forward

Postby treefrog » Sun May 24, 2020 11:58 am

Sounds like you have no master slide. The bottom slide should be L shaped and all the slides above sit in it like a carriage. The rod pushes the master slide which carries all the other slides above...

Gotta a picture?

consul1961
Posts: 6
Joined: Mon Jun 17, 2019 7:45 pm
Location: Suffolk

Re: Aristocrat Olympic pay sides don't push forward

Postby consul1961 » Sun May 24, 2020 12:23 pm

Unfortunately, I cannot add a picture for some reason. I have removed the slides and the bottom one is flat and looks like the L has broken off, as there is damage at the end of the slide. Does anyone know where I could get a replacement from?

User avatar
badpenny
Forum Moderator
Posts: 6209
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Aristocrat Olympic pay sides don't push forward

Postby badpenny » Sun May 24, 2020 12:39 pm

So if only the top slides move, what is moving them if, as you say the vertical edge of the L is missing?
The button for adding an image is below this text box, next to options.

BP :cool:

User avatar
treefrog
Posts: 3598
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Aristocrat Olympic pay sides don't push forward

Postby treefrog » Sun May 24, 2020 12:52 pm

Probably only a 10 coin payout, so 5 slides and as such the push bar may hit the deck higher.

I am guessing it is 1np... Unusual for a breakage, never seen before... I can check but don’t have many Aristocrat items.

consul1961
Posts: 6
Joined: Mon Jun 17, 2019 7:45 pm
Location: Suffolk

Re: Aristocrat Olympic pay sides don't push forward

Postby consul1961 » Sun May 24, 2020 12:59 pm

Here are pics. It is a 1np.
IMGP9258a.jpg
IMGP9257a.jpg

User avatar
treefrog
Posts: 3598
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Aristocrat Olympic pay sides don't push forward

Postby treefrog » Sun May 24, 2020 1:44 pm

Certainly broken, I would check that the rubber damper is still in place where the slide slides into at the end of the cycle as it should absorbed the shock. If missing, it maybe that over type metal on metal has caused the slide to fracture. A jam could also be the cause as forcing operation may put pressure in various places.

If you measure the distance between bottom edge of slide and edge of hole will check as slides do vary
5C1FEAE6-CD0F-4298-A972-95C1607A035D.jpeg
5C1FEAE6-CD0F-4298-A972-95C1607A035D.jpeg (64.34 KiB) Viewed 42 times


Who is online

Users browsing this forum: No registered users and 2 guests