Decorative edge trim for an Exacta

[stoxman22]

I am attempting to make a new case for a Wulff Exacta I have. What I need is the trim that is round the edge of the case at the front. I will need a "J" shaped profile and gold colour. I haven't found anything that looks like what I want, or a search term to look for. I got a bag of sample colours from Harold English some years back so I know it is out there but he didn't say where he could get it. Can anyone help?

[special when lit]

Don't know where to get any, but I've got exactly the same trim on my 1960s coffee table.

[treefrog]

Did you get that buy-it-now one on eBay which I considered, but too far? If so, the trim looked OK, although I could not see the whole case.

[pennymachines]

Probably not helpful or relevant, as they're PVC, but this Chinese seller offers bespoke designs.

[slotey]

yes but isn't the chinese seller saying minimum order 3000 mts seems a lot for one machine may have a bit left over

[stoxman22]

Did you get that buy-it-now one on eBay which I considered, but too far? If so, the trim looked OK, although I could not see the whole case.

Yes Treefrog I bought that one off ebay. Mech is fine but the case can be crumbled to dust by hand. I have never seen so many woodworm holes in my life. The front is just solid enough to use as a template.
The trim on the old case is a T profile and I am not clever enough to make a groove around the edge of the case I am making to accommodate this so I am looking for a J profile that I can glue on and have the curly bit hanging over the edge if that makes sense
You mentioned in a 2017 post you had a spare case. Have you still got it?

[treefrog]

I do have a perfect Exacta empty case given to me by the owner of the Robin Hood pub in Sheringham that has machines in it, he recased his machine in a new case because he preferred square edges. Unfortunately although I have had a while, I have a rough Exacta myself and plan to use for this. Cases on all these machines (Gunter Wulff) are a nightmare, probably 30% are totally knackered....

In fact I have another two mechanisms and cabinet furniture awaiting cabinets..... I have been tempted, instead trying to make something look like the original, being inventive like some of the revamps done

[nick6969]

Hi there, did you manage to source the trim ? I managed to source what appears to be a similar trim on ebay for my Brenco Swinging Swinger machine recently .

[special when lit]

Hi Nick. Where did you get your trim from? I'm going to need some for a machine I've just bought.

[nick6969]

Hi there, I bought the trim from ebay (here is a link), then put a black pinstripe down the centre. Trim comes in different widths and lengths and has its own sticky back:

https://www.ebay.co.uk/itm/15mm-x-5-met ... SwqrVci3lH