Decorative edge trim for an Exacta

Somebody knows... Maybe you?
Post Reply
User avatar
special when lit
Posts: 495
Joined: Fri Dec 17, 2004 4:46 pm
Reaction score: 2
Location: Derby

Re: Decorative edge trim for an Exacta

Post by special when lit »

Thanks.
stoxman22
Posts: 120
Joined: Tue Dec 06, 2005 10:18 am
Reaction score: 0
Location: Cheshire

Re: Decorative edge trim for an Exacta

Post by stoxman22 »

I found some edge trim that I was thinking of on eBay. Not cheap at £13 a meter but it's going to look great I think.
Attachments
IMG_20201009_141856643a.jpg
IMG_20201009_141759779a.jpg
stoxman22
Posts: 120
Joined: Tue Dec 06, 2005 10:18 am
Reaction score: 0
Location: Cheshire

Re: Decorative edge trim for an Exacta

Post by stoxman22 »

So finally I have finished my Exacta with the new case I have made. I am quite pleased with it as wood work is not my first skill. I think the trim looks great. It took ages to put on as the corners would cause the bit before and after to lift so had to clamp the strip down as I fitted it.
Attachments
Exactaa.jpg
highfield
Posts: 195
Joined: Mon Apr 08, 2013 9:23 pm
Reaction score: 1

Re: Decorative edge trim for an Exacta

Post by highfield »

Fantastic job. Well done **xXx**
User avatar
treefrog
Posts: 4813
Joined: Mon Sep 29, 2008 2:46 pm
Reaction score: 31
Location: Suffolk

Re: Decorative edge trim for an Exacta

Post by treefrog »

Super work Stoxman, the Gunter Wulff returns !!THUMBSX2!!
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Decorative edge trim for an Exacta

Post by badpenny »

Nice work that, well done.
I have a very soft spot for Günter Wulff mechanical machines, they're like the Cinderella of my era.
Yet the mechanics are beyond compare when it comes to design.
stoxman22
Posts: 120
Joined: Tue Dec 06, 2005 10:18 am
Reaction score: 0
Location: Cheshire

Re: Decorative edge trim for an Exacta

Post by stoxman22 »

I have managed to buy some of this plastic gold J profile trim but I had to buy bulk. I will put it on the for sale page over the weekend.
Attachments
j-trima.jpg
j-trima.jpg (43.6 KiB) Viewed 385 times
raj
Posts: 642
Joined: Tue Apr 29, 2008 7:19 am
Reaction score: 1

Re: Decorative edge trim for an Exacta

Post by raj »

Well done sourcing the trim, I found using a hot air gun on bends and corners makes life a lot easier, especially on T moulding.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 20 guests