Comment on this site; suggest improvements; be firm but polite.
riche100
Posts: 232
Joined: Tue Nov 13, 2012 10:26 pm

9 meg upload limit?

Postby riche100 » Thu Jan 14, 2016 12:28 am

any chance i could upload some files to help forum members ?

the small and meger 8 meg upload limit on a file isnt very good

anychance of upping it ?

User avatar
coppinpr
Posts: 3675
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: 9meg upload limit ?

Postby coppinpr » Thu Jan 14, 2016 10:44 am

what makes your files so big??

riche100
Posts: 232
Joined: Tue Nov 13, 2012 10:26 pm

Re: 9meg upload limit ?

Postby riche100 » Thu Jan 14, 2016 11:53 am

its a pdf thats 9meg or just over is size .

8mg limit is tiny ?

the schematics are massive sheets so have to be photographed rather than scanned so ive used a 12 mpixel camera so they can be enlarged and read clearly and easily as they are over 30 years old

User avatar
pennymachines
Site Admin
Posts: 4598
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: 9meg upload limit ?

Postby pennymachines » Thu Jan 14, 2016 12:39 pm

OK - I've upped it to 20 MiB.

I may see if I can do something to reduce your file sizes (without losing too much quality) after you've uploaded them. I'm mindful that some of our members are still on dial up.

riche100
Posts: 232
Joined: Tue Nov 13, 2012 10:26 pm

Re: 9 meg upload limit?

Postby riche100 » Thu Jan 14, 2016 4:43 pm

thank you

haha dialup ?? really ?

wow

riche100
Posts: 232
Joined: Tue Nov 13, 2012 10:26 pm

Re: 9 meg upload limit?

Postby riche100 » Thu Jan 14, 2016 4:47 pm

ive now upped it to resources section , see what you can do with it, as mentioned they are 12 meg pixels pis so folks can zoom in and read clear .

sorry to the folks on dial up internet and slow devices

regards

richard

User avatar
pennymachines
Site Admin
Posts: 4598
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: 9 meg upload limit?

Postby pennymachines » Fri Jan 15, 2016 11:44 am

Hi Richard,

Thanks for uploading the schematics. I'm sure sooner or later somebody's going to find them very useful.
Just a suggestion - if it is possible (by folding perhaps) to scan those sheets bit by bit, we could produce a much clearer copy at a much smaller file size. I could easily stitch the pieces back together in Photoshop. It's hard to do this working from photos because of lower resolution, lens distortions, perspective, uneven lighting, etc.

I wonder if broadband has reached our collector friend in Ontario yet? !!UHOH!!

riche100
Posts: 232
Joined: Tue Nov 13, 2012 10:26 pm

Re: 9 meg upload limit?

Postby riche100 » Fri Jan 15, 2016 8:05 pm

i sold the machine and schematics went with it sorry


Who is online

Users browsing this forum: No registered users and 2 guests