Page 1 of 1
9 meg upload limit?
Posted: Thu Jan 14, 2016 12:28 am
by riche100
any chance i could upload some files to help forum members ?
the small and meger 8 meg upload limit on a file isnt very good
anychance of upping it ?
Re: 9meg upload limit ?
Posted: Thu Jan 14, 2016 10:44 am
by coppinpr
what makes your files so big??
Re: 9meg upload limit ?
Posted: Thu Jan 14, 2016 11:53 am
by riche100
its a pdf thats 9meg or just over is size .
8mg limit is tiny ?
the schematics are massive sheets so have to be photographed rather than scanned so ive used a 12 mpixel camera so they can be enlarged and read clearly and easily as they are over 30 years old
Re: 9meg upload limit ?
Posted: Thu Jan 14, 2016 12:39 pm
by pennymachines
OK - I've upped it to 20 MiB.
I may see if I can do something to reduce your file sizes (without losing too much quality) after you've uploaded them. I'm mindful that some of our members are still on dial up.
Re: 9 meg upload limit?
Posted: Thu Jan 14, 2016 4:43 pm
by riche100
thank you
haha dialup ?? really ?
wow
Re: 9 meg upload limit?
Posted: Thu Jan 14, 2016 4:47 pm
by riche100
ive now upped it to resources section , see what you can do with it, as mentioned they are 12 meg pixels pis so folks can zoom in and read clear .
sorry to the folks on dial up internet and slow devices
regards
richard
Re: 9 meg upload limit?
Posted: Fri Jan 15, 2016 11:44 am
by pennymachines
Hi Richard,
Thanks for uploading the schematics. I'm sure sooner or later somebody's going to find them very useful.
Just a suggestion - if it is possible (by folding perhaps) to scan those sheets bit by bit, we could produce a much clearer copy at a much smaller file size. I could easily stitch the pieces back together in Photoshop. It's hard to do this working from photos because of lower resolution, lens distortions, perspective, uneven lighting, etc.
I wonder if broadband has reached our collector friend in Ontario yet?
Re: 9 meg upload limit?
Posted: Fri Jan 15, 2016 8:05 pm
by riche100
i sold the machine and schematics went with it sorry