9 meg upload limit?
9 meg upload limit?
any chance i could upload some files to help forum members ?
the small and meger 8 meg upload limit on a file isnt very good
anychance of upping it ?
the small and meger 8 meg upload limit on a file isnt very good
anychance of upping it ?
Re: 9meg upload limit ?
its a pdf thats 9meg or just over is size .
8mg limit is tiny ?
the schematics are massive sheets so have to be photographed rather than scanned so ive used a 12 mpixel camera so they can be enlarged and read clearly and easily as they are over 30 years old
8mg limit is tiny ?
the schematics are massive sheets so have to be photographed rather than scanned so ive used a 12 mpixel camera so they can be enlarged and read clearly and easily as they are over 30 years old
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: 9meg upload limit ?
OK - I've upped it to 20 MiB.
I may see if I can do something to reduce your file sizes (without losing too much quality) after you've uploaded them. I'm mindful that some of our members are still on dial up.
I may see if I can do something to reduce your file sizes (without losing too much quality) after you've uploaded them. I'm mindful that some of our members are still on dial up.
Re: 9 meg upload limit?
ive now upped it to resources section , see what you can do with it, as mentioned they are 12 meg pixels pis so folks can zoom in and read clear .
sorry to the folks on dial up internet and slow devices
regards
richard
sorry to the folks on dial up internet and slow devices
regards
richard
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: 9 meg upload limit?
Hi Richard,
Thanks for uploading the schematics. I'm sure sooner or later somebody's going to find them very useful.
Just a suggestion - if it is possible (by folding perhaps) to scan those sheets bit by bit, we could produce a much clearer copy at a much smaller file size. I could easily stitch the pieces back together in Photoshop. It's hard to do this working from photos because of lower resolution, lens distortions, perspective, uneven lighting, etc.
I wonder if broadband has reached our collector friend in Ontario yet?
Thanks for uploading the schematics. I'm sure sooner or later somebody's going to find them very useful.
Just a suggestion - if it is possible (by folding perhaps) to scan those sheets bit by bit, we could produce a much clearer copy at a much smaller file size. I could easily stitch the pieces back together in Photoshop. It's hard to do this working from photos because of lower resolution, lens distortions, perspective, uneven lighting, etc.
I wonder if broadband has reached our collector friend in Ontario yet?
Who is online
Users browsing this forum: Bing [Bot] and 9 guests