American, British, French or German? We want to know about it.
tiggy125
Posts: 4
Joined: Sat Jun 06, 2020 2:57 pm

Bryans Six Win Clock restoration

Postby tiggy125 » Mon Jun 22, 2020 8:21 pm

Hi All,
Had this machine for several years. Lockdown and shielding has enabled me to get a start on restoring it.
It appears to be an early machine, no.188. Does this make it early '30s?
The front has been covered with a replacement veneer covering the jackpot window. I have replaced the veneer. Does anyone out there have a jackpot window casting?
I’m also looking for any skill stop parts, as all I have is the hole in the top of the cabinet!
Will post more pictures as progress is made.
07A063F3-C97E-4749-9AA1-747DEC0117DCa.jpg
D7D13202-17DB-4674-AAAC-7C8486F84CEEa.jpg

User avatar
pennymachines
Site Admin
Posts: 5048
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Bryans Six Win Clock restoration

Postby pennymachines » Wed Jun 24, 2020 12:19 pm

tiggy125 wrote:
Mon Jun 22, 2020 8:21 pm
It appears to be an early machine, no.188. Does this make it early '30s?
Yes, the Six Win predates the Twelvewin and appears to have gone into production around 1930. The original patent (GB353451) was applied for April 17th, 1930.

The skill stop mechanism isn't complicated, and should be possible to fabricate. See patent and Clock Jackpot and Skill stop for details. The button itself is sometimes a turned chrome knob, sometimes just a piece of rounded-off steel rod.

I like the inner brass bezel on your clock face - don't think I've seen that before.

tiggy125
Posts: 4
Joined: Sat Jun 06, 2020 2:57 pm

Re: Bryans Six Win Clock restoration

Postby tiggy125 » Wed Jun 24, 2020 3:40 pm

Thanks Pennymachines. I will attempt to make Skill stop. As you say, it doesn’t look too complicated.
The inner brass bezel was just glued on the clock face - I’m undecided as to whether I’ll refit it or not.
As for the jackpot window casting, I’ve been in the shed this morning and fabricated one - maybe not 100%, but pretty close.
B0454BE1-5961-4ACC-8C6F-660A9BE30E89.jpeg

highfield
Posts: 107
Joined: Mon Apr 08, 2013 9:23 pm

Re: Bryans Six Win Clock restoration

Postby highfield » Wed Jun 24, 2020 4:58 pm

That’s a great job ! !!THUMBSX2!!

13rebel
Posts: 491
Joined: Tue Nov 03, 2009 4:03 pm

Re: Bryans Six Win Clock restoration

Postby 13rebel » Wed Jun 24, 2020 6:40 pm

Well done! CoNgRaTs

User avatar
pennymachines
Site Admin
Posts: 5048
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Bryans Six Win Clock restoration

Postby pennymachines » Wed Jun 24, 2020 7:29 pm

If you can knock that together in a morning you should have no difficulty with the skill stop. !!HOORAY!!

User avatar
special when lit
Posts: 265
Joined: Fri Dec 17, 2004 4:46 pm
Location: Derby

Re: Bryans Six Win Clock restoration

Postby special when lit » Thu Jun 25, 2020 3:20 pm

That looks pretty good. Sure there was a thread on here, a couple of years ago about what the Bryans symbols meant, but can't seem to find it.

User avatar
treefrog
Posts: 3661
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Bryans Six Win Clock restoration

Postby treefrog » Thu Jun 25, 2020 7:05 pm

You might be referring to the Bullion topic with the five symbols: Bryans and the mystical 5

Wish I could produce things like that in a morning. :shock:

raj
Posts: 611
Joined: Tue Apr 29, 2008 7:19 am

Re: Bryans Six Win Clock restoration

Postby raj » Sat Jun 27, 2020 6:57 am

last time I did one of these I found chrome screws holding the bezels to the case stupid money, so improvised by using nickel plated electrical socket machine screws and matching nuts instead..cheap as chips from screwfix. A quick spin on the polishing wheel, and just like chrome. Mine was numbered 101, probably the first production model.


Who is online

Users browsing this forum: No registered users and 4 guests