Wonders "Dropacopper"

American, British, French or German? We want to know about it.
Post Reply
User avatar
coppinpr
Posts: 4276
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Wonders "Dropacopper"

Post by coppinpr »

Just finished this Dropacopper I bought on Ebay - not the greatest machine ever made but marks a point in British machine history. Trouble with it was, in my view, it was designed to be a poor pay out AND it gave the operator a chance to make it even worse by moving the spacers. The makers of the new electric machine beginning to take over at the time had worked it out that if you give the punter 70% payout he will play it till he's lost the lot anyway. This machine makes you want to walk away after three of four coins. Still it was interesting to work on. The case was pretty much destroyed; I was going to replace at least the top which had large holes in it but decided to see if it could be restored, snd it could and looks great. I replaced the spacers, which was easy as, as you might expect, they are simply 3/4 inch cistern washers. They cost me £1.50 for a pack of 10, just the right number. I sprayed the faces and left the edges black and they look good. Most of these were designed to allow the coin to go left or right. This one is left only so forget 12d win. The payout cup was interesting - it was double sided, so by turning it round I got a brand new shiny one.

A badly thought out design all round really, unless dead level it will either lose every time or pay 6d about 60% of the time. Nothing will make it pay 12d.

The internal payout chute is too flat as designed and coins tend to stick in the chute no matter how much you polish it. On the other side the win coin run on the playfield is too steep not always giving the single solenoid payout slide time to re-set if the machine is trying to pay three times on a 9d winner. Overall the design, workmanship and materials are poor and the whole thing has a sad and desperate feel to it but it does have a place in British slot machine history... just not a good one.

Has anone any idea what the strange engraved part of the Wonders badge is meant to be? A reference to their allwin days perhaps?
Attachments
wonders badge.jpg
dropacopper1.jpg
User avatar
treefrog
Posts: 4025
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Wonders "Dropacopper"

Post by treefrog »

I have a spare cabinet for one of these I think.

The badge is their logo and used on allwins as well. The etching is the image of the finger plate of an allwin with the flicker and they have the 'W' logo on the finger plates as well as coin cups.
User avatar
badpenny
Forum Moderator
Posts: 6560
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands

Re: Wonders "Dropacopper"

Post by badpenny »

You're right in everything you say.

Mine does allow the coin to go right, but it then tends to still go down a lose hole.

I don't have any issues with coins sliding down the internal chute. In the past I have had such problems and gotten around it by going to a model shop and buying a couple of lengths of tiny diameter copper rod. If you attach that like a pair of railway tracks the length of the chute it overcomes the problem because you're greatly reducing the surface area the coin comes into contact with and of course friction.

Often solving one problem causes another. Mine had been tweaked to give a more generous payout percentage, however as you'll have already discovered because the last lose hole is so low the payout tube is amazingly short.
Consequently if you get a couple of six payouts in close proximity of each other you can empty it.

The issue of the solenoid not recovering in time for the next payout may simply be the spring is not strong enough to snap it back smartly.
Mine has a hefty great blighter fitted.

The Wonders badge is the same one they fitted to their Allwins.
I do remember playing them as a child and I also recall walking away after a couple of coins. However they are what they are and as such deserve to be preserved for posterity just as much as retired Butchers and out of use by date Human Resource Managers.

BP
User avatar
moonriver
Posts: 616
Joined: Wed Oct 16, 2013 12:56 am

Re: Wonders "Dropacopper"

Post by moonriver »

The Wonders badge is actually a 'cock and balls' image and was a tongue in cheek addition by the gay owners. It does resemble the handle of the allwin but once you know the secret behind it , it really stands out :lol:
User avatar
JC
Posts: 963
Joined: Sun Feb 19, 2006 10:38 pm
Location: Kent
Contact:

Re: Wonders "Dropacopper"

Post by JC »

I think that story is just that, a story - it's been debunked and can be found on this site somewhere. The proprietor of Wondermatics was not homosexual.
User avatar
pennymachines
Site Admin
Posts: 5351
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country

Re: Wonders "Dropacopper"

Post by pennymachines »

Yes, apparently it's a cock and bull story.
User avatar
moonriver
Posts: 616
Joined: Wed Oct 16, 2013 12:56 am

Re: Wonders "Dropacopper"

Post by moonriver »

Haha, just like the Davinci code, it's there for all to see once someone mentions it.
User avatar
bryans fan
Posts: 668
Joined: Mon Feb 03, 2003 10:15 pm
Location: Somerset

Re: Wonders "Dropacopper"

Post by bryans fan »

If looks like a duck, sounds like a duck and walks like a duck, it's a duck (or in this case a dick).

User avatar
moonriver
Posts: 616
Joined: Wed Oct 16, 2013 12:56 am

Re: Wonders "Dropacopper"

Post by moonriver »

haha thats funny. Well, whatever the reality was it shows a great sense of humour (and some balls) to put that logo on so many machines at that time too
cait001
Posts: 217
Joined: Mon Jun 18, 2018 1:33 am
Location: Canada
Contact:

Re: Wonders "Dropacopper"

Post by cait001 »

anyone ever seen this machine before? It looks like a Dropacopper mechanism, but with American imagery.
I'm assuming it's a drop-case machine, but that the image is too blurry to see the pins the coin falls through, but I'm unsure!
These were screen caps from some video, and I can't remember where I took them from.
Attachments
unknown stim 2.jpg
unknown stim 1.jpg
Post Reply

Who is online

Users browsing this forum: brigham and 14 guests