American, British, French or German? We want to know about it.
Well the question of whether to remove the second piece of glass was answered for me tonight when I lifted it up, the extra piece fell off. Perished glue I think. It hasn't made much difference to the paintwork, thank god, just a bit of paint loss at the bottom where most of the damage is anyway. Started cleaning the original with cotton buds pinched from my granddaughter and warm soapy water. It seems to be responding well although I think I am in for the long term; a very slow process. I have done my best to retain the original wooden casing, but it was in pretty poor condition with woodworm and the base has been in contact with water leaving the wood rather weak. I have had to strengthen it inside and add a few more securing screws here and there, but it should be strong enough to take the weight of the glass again. As much work as this will be, I am loving doing it. It is very satisfying to see it come to life in front of me. Any one out there know where I can get some glass paints? MM
Test a range of paints. Quite thick acrylic paints can work well inside glass looking out. If they are too thin, Hobbycraft is the place. They do several glass paints but these also tend to be too thin as they are actually intended to be seen through but they do do a range of quite thick applications (I wouldn't call them paints, but I guess they are in reality). When applied they form quite a thick lumpy (by paint standards) layer on the inside but a solid non-see through view from the outside. I can't remember what they are called but I did put a post on here some years ago about them. Try acrylics first - if they work they are easiest to use.
Users browsing this forum: No registered users and 2 guests